Dec 8, 2025
4
0
Hello all

I drive a seat Leon 2020 plate standard model. Not an FR / cupra.

I was recently involved in an incident with a bus whereby it crashed into the side of my car, essentially scraping it. Causing damage to my rear off side bumper and rear bumper. In doing so, it has caused damage to one of my sensors - as shown in the picture.

I have since had multiple error messages all to do with my sensors, all whilst stationary, parking or even driving. I’ve shown pictures too of this.

Will this all be linked and caused by damage to the one sensor? It’s thrown me a little as sometimes the reversing sensors work, and not the ones at the front. You’d have thought it would’ve been the other way around?

Many thanjs
 

Attachments

  • IMG_8076.jpeg
    IMG_8076.jpeg
    768.4 KB · Views: 8
  • IMG_8065.jpeg
    IMG_8065.jpeg
    661.5 KB · Views: 8
  • IMG_8102.jpeg
    IMG_8102.jpeg
    454.2 KB · Views: 6
  • IMG_8111.jpeg
    IMG_8111.jpeg
    242.7 KB · Views: 7
Also this one. Please NOTE. I did not take the photo of this. My Mrs did!😂 - just to prove it happens at times I do not need the parking aid
IMG_8099.jpeg
 
The best bet would to be to have the damage repaired, sensor replaced and reassess the issue.
 
  • Like
Reactions: Rich21
As a system they are all linked, yes.

The issue could well be that one sensor bringing down the whole system.
 
  • Like
Reactions: Rich21
As a system they are all linked, yes.

The issue could well be that one sensor bringing down the whole system.
That’s so annoying! Luckily for me though I’m not at fault for the incident so the bus company shall be sorting this. Thank you