Please help, got a load of throttle position faults

[n0ble]

Hi,

Car: Seat Leon Cupra 240 TFSI 2009

I just parked up and was sat with teh car on idle and then the car stalled.

Tried to start the car back up and it was very rough, also got EPC and Engine light on.

The faults that VAG COM has displayed is:

Saturday,03,March,2012,21:42:20:13314
VCDS Release 908.0: Generic OBD2
Mode 07: Pending emission related fault codes

Address 7E8: 3 Faults Found:
P0121 - Throttle Position Sensor (G69): Implausible Signal
P2101 - Throttle Valve Actuator Control System: Malfunction
P0221 - Angle Sensor 2 for Throttle (G188): Implausible Signal

Can anyone help or tell me where i should be looking under the bonnet?

 

[n0ble]

I managed to fix this. I just reseated the connectors.

 

[vincent5525]

Tell us more... Loose connection on the throttle pedal?

 

[n0ble]

I just reseated the plugs on the throttle body and now it seems fine.

I do now have a problem with one of my xenons not turning on sometimes but if I turn the lights on and off it does come back on but I suspect this is due to me fiddleing with the lights in the dark.
When I got the throttle errors I put orginal side lights back instead of the led bulbs and I have probably knocked a wire loose

 

[CovCupra]

this sounds very simular to what happened on my 09 cupra as well. The dealer has had it for nearly 2 weeks, and has replaced connections in the areas related to the fault codes. They'd checked all the components but nothing would fault out then...

 

[n0ble]

When do you get your Cupra back?

Just seems like loose connections to me.

 

[CovCupra]

Just had it back. thurs last week. Thats what theyve put it down to. Had em puzzled for some time along with Seat Tech dept.

 

[n0ble]

Have you had any issues with your xenons too?
I have had a fiddle and now they seem ok.

 

[CovCupra]

not got xenons on mine...