I have a 2007 seat Leon Cupra with a hybrid turbo map from r tech. I am getting misfire on cylinder 3 once I have drove it a mile or so.. and then the car sounds it’s burbling ticking over (other words bad misfire) I have done a compression test , a leak down test Which came back with very strong results, I then replaced the coil pack , and a fresh set of spark plugs and the problem still exists . the injectors have only been used for 1500 miles max since they got fitted/mapped so I am
Very certain it is not them causing the code. My local garage have suggest it could be movement in the gear box and r tech have said it could have crank movement and suggested I take the sump off and check it, has anyone seen or had this before?
cheers Ryan
Very certain it is not them causing the code. My local garage have suggest it could be movement in the gear box and r tech have said it could have crank movement and suggested I take the sump off and check it, has anyone seen or had this before?
cheers Ryan
Last edited: