Rear washer problem

[cupra_tan]

Hi All.

The rear jet wash hasnt been working on my 02 leon cupra for a few weeks and ive decided I should probably try and fix it

Can anybody tell me how to locate the pipe so that I can see if it has disconnected?

Thanks in advance.
Tan

 

[seantdi]

you need to take off the pannel on the passengers side in the boot. 3 screws 2 at the light one where the seat closes down. thats where mine was broke anyway. do a quick search and you should find more info

 

[cupra_tan]

you need to take off the pannel on the passengers side in the boot. 3 screws 2 at the light one where the seat closes down. thats where mine was broke anyway. do a quick search and you should find more info

right...i just removed this panel and located the pipe and it was all still connected in there..ive noticed the water is coming out through the boot lock.

any ideas what to try next??

thanks

 

[dmmsta]

right...i just removed this panel and located the pipe and it was all still connected in there..ive noticed the water is coming out through the boot lock.

any ideas what to try next??

thanks

Has been discussed loads of times on here.

Is most likely where the pipe connects to the wiper arm on the boot. You need to remove the boot panel (on the hatch section) and check it there.
Worst case is the brass pipe that goes through the wiper mech has broken.

Do a search, and all will be revealed!!!