Revo Remap @ JKM

[RachIbiza]

A very specific question but i'm considering the revo remap at JKM (portsmouth) to take my pd130 to 170bhp and 280lb ft torque quoted online for £350. My mate had his mk4 golf gti anniversary done there with full exhaust system and hes had no problems and it seems to make a big difference! Just wondering if anyone here has had their mk4 done and how they've found it? ta, Rach

 

[st10587]

I had my FR done by P Toruqe. power wise i got 182bhp and 282lbft of torque and mine was £260 with before and after rolling road runs iirc.

 

[mhill]

I had my FR done by P Toruqe. power wise i got 182bhp and 282lbft of torque and mine was £260 with before and after rolling road runs iirc.

This man speaks the truth

 

[richybigman]

Not an ibiza but i've had quite a bit of work done by JKM to my LCR and they are one of the best.

 

[Ibiza 130 tdi]

I had my FR done by P Toruqe. power wise i got 182bhp and 282lbft of torque and mine was £260 with before and after rolling road runs iirc.

I must admit I would choose P-torque also. Well....I have for my hybrid!

Not only is Will cheaper but has good results and the before and after rolling road printout. And a rolling road day normally charges £30-£50. So can't complain.

A lot of people go to the big companies but I had my car remapped by Chipboost.com at Scarborough. I got a 186.1bhp and 286.9ft/lb of torque result and only paid £200 for it. Can't be bad eh?

 

[RachIbiza]

Its just that JKM are down the road so its easier haha where is P torque?

 

[st10587]

Its just that JKM are down the road so its easier haha where is P torque?

Wolverhampton! worth the drive as your save so much money

 

[RachIbiza]

yeh its 3 hours from portsmouth or 1.5 hours from oxford where i am most of the time. Something to think about i guess for nearly £100 less for the remap. What if something goes wrong and i need to take it back there tho? haha not good

 

[st10587]

yeh its 3 hours from portsmouth or 1.5 hours from oxford where i am most of the time. Something to think about i guess for nearly £100 less for the remap. What if something goes wrong and i need to take it back there tho? haha not good

hey im near portsmouth and i made the treck! it doesnt take aslong as multimap says. i done it in about 2 and a half hours

 

[RachIbiza]

Ok i'll have to get quotes from both and work out cost of making the trip against how much JKM offer and stuff! I'll have to get all geeky with a calculator for a day

 

[cupra.al]

does anybody recommend amd as there kinda near me and closer than anybody else i believe?

 

[Ibiza 130 tdi]

I have to travel from Somerset to get the work done! Takes me about 2 or so hours to get there. But the way I see it, the longer the drive to get there - the longer the fun on the way back!

 

[RachIbiza]

I have to travel from Somerset to get the work done! Takes me about 2 or so hours to get there. But the way I see it, the longer the drive to get there - the longer the fun on the way back!

This is true! Only good thing about the drive somewhere you cant be too bothered to go, is the drive back! and after a remap i expect i will enjoy it that little bit more

 

[Ibiza 130 tdi]

This is true! Only good thing about the drive somewhere you cant be too bothered to go, is the drive back! and after a remap i expect i will enjoy it that little bit more

Too right! You'll love it! POWER!

 

[RachIbiza]

i'll have to see if anyone else replies about JKM before i make a decision!

 

[Red ibiza]

Have a look at this thread Rach http://www.seatcupra.net/forums/showthread.php?p=2307408#post2307408

takes the price of the revo software down to £321.08 ish

cheers

Bruce

 

[Breezapom]

il be getting my revo done soon by jkm once my discount code comes back from revo

 

[kriso]

I've had 2 P-Torque remaps and made the 400 mile round trip twice! It doesn't take long from Oxford, its exactly half way there for me. JKM is closer and I get other work done there...they are very good. But P-Torque is a great remap

 

[LoDa]

I have had my Revo stage one at JKM - Good service and felt the difference strait away. I did not get a rolling road at the same time tho so I can't say what the specific figure is. I'm getting some big work done with them in march and I also think they are worth travelling for.

 

[Tom.]

Im running Revo stage1 on my PD130 at current. Its not too bad, but id personally reccomend finding your nearest custom code dealer.

The top 4 quickest stage 1 PD130 ibiza to run at santa pod, i believe have all had custom code software.

They may not quote or get the highest figures, but they are the quickest in reality.