Revo stage 2 fitted - help!!!

[Undezcupra]

ok mate, cheers, sorry i forgot

 

[Beaker™]

i was running settings 8,8 i told you to turn them down straight away mate!

also told you to check the 2nd actuator pipe as i havent removed the n112 on a standard turbo car before (actuator with 2 take offs)

HoocH

I've blanked off the 2nd actuator vac pipe on my k03 (along with n249 bypass), and it runs fine if that helps.

 

[h17och]

try just blanking it mate... see if it helps

 

[Undezcupra]

ok so im going to tsl on wednesday...

what stage 2 settings shall i run?
or shall i whip it back to stage 1 for the meantime

list of mods:

Miltec race cat
Miltec exhaust
4Bar Regulator
Jabbasport induction kit
Forge turbo intake pipe
Forge split r valve

 

[Undezcupra]

................

 

[Martyn]

Boost 6, timing 6 should be reasonably safe. Don't forget to reset the ECU afterwards.
You really need someone to log the car with vag-com to get the best out of stage 2.

 

[Undezcupra]

thanks alot martyn

 

[T.C cupra]

thought you told me you wrote it off!?

 

[h17och]

he just bent the drive shaft and broke a wheel

 

[Undezcupra]

thought you told me you wrote it off!?

wtf?

i told you nothing of the kind, i said i crashed it again, thats quite clearl;y nothing to do with this post..........

 

[Undezcupra]

wtf?

i told you nothing of the kind, i said i crashed it again, thats quite clearly nothing to do with this post..........

 

[cuprabaz]

Hmmm a crash. No mention of this when you sold it to us. What was the damage so we can keep an eye on things?????

What settings is the car running now?

 

[Undezcupra]

i did mention it mate, i just buckled the front wheel when i hit a kurb, i replaced all 4 wheels and put a new driveshaft and wishbone on, no body damge occured what so ever, and the work was done at seat

all the settings are on the receipt i gave you with the car from tsl in nottingham

 

[cuprabaz]

The receipt only says settings adjusted due to poor performance.

Is it running stg1 or 2 at the moment??

cheers

Baz

 

[cuprabaz]

James my brother's asking where the locking wheel nut is?? It's no where to be seen.