-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
oh yeh dont deny tht just might look a lil large
gorgeous tho, if they did them in 17 id have em!
gorgeous tho, if they did them in 17 id have em!
They do!
But maybe not on that site, but i'd wonder why a set of wheels which are £480 each are being sold for less than the per wheel price for a set of 4!
But maybe not on that site, but i'd wonder why a set of wheels which are £480 each are being sold for less than the per wheel price for a set of 4!
Shock_Xe said:ahh, I like the kei ones specially the force 8/10 but they only come in high offsets (43+) so Brembos are no go
Mine are et42 Kei racing ones and i seriously think i could get brembos on, look at my spoke design as Bill says i have loads of room between my standard calipers.
it does say 3 lots availabel if you look at the info - so both go for it. the shop is at http://stores.ebay.co.uk/Alloywheels4U
ET40 is only 2mm away from the standard offset of ET38, so I don't see why they wouldn't fit as long as they're 7 or 7.5" wide. As for Brembo's, depends on the clearance behind the spokes, but a smal spacer could be the answer.
The centre bore is something to think about too, standard size is 57.1 AFAIK, spigot rings can sort that out if needed usually.
The centre bore is something to think about too, standard size is 57.1 AFAIK, spigot rings can sort that out if needed usually.
Shock_Xe
Guest
Russ_20vt said:Shock_Xe said:ahh, I like the kei ones specially the force 8/10 but they only come in high offsets (43+) so Brembos are no go
Mine are et42 Kei racing ones and i seriously think i could get brembos on, look at my spoke design as Bill says i have loads of room between my standard calipers.
know anyone with brembos you could try??
I know they won't fit... I have some ET42's on my new Cupra and the owner who fitted the Brembo's needed to fit 15mm hub centrics for them to fit. I'm going to be fitting my 1000 miles old Brembo's and my SEAT OZ wheels at the weekend!
ET42 yeah but the same wheel? Those wheels above might have more caliper clearence because of the spoke design.
Kei Racing ones, 12 spokes, but in strands of 6, look just like the above wheels but with a gap inbettween every spoke! Same curve on them, etc...
Remember what bill said though.........offset dosen't mean much with brembo clearance, its the clearance between spokes and the calliper...............
anybody got the BK racing 604s on theres? i quite like them http://www.wheel-base.co.uk/proddetail.asp?prod=BK604
Addo
Guest
What is the widest trye fitted on std arches just rolled i.e. not like bills that have been heavily modded
im want to fit 225 width road tyres and im looking at 17" MO's. i want to fit the 6 spoke Mo but they on come in 8" at the moment apparantly within 6months maybe 17" x 7.5 available.
Is anybody running 225 width tyres.
im want to fit 225 width road tyres and im looking at 17" MO's. i want to fit the 6 spoke Mo but they on come in 8" at the moment apparantly within 6months maybe 17" x 7.5 available.
Is anybody running 225 width tyres.
Buy them anyway, and see if Brembos fit, if they dont, like you said, a set of 4 for less than one wheel retail, sell em on ebay or sumat, you'd get your money back with a profit aswell i bet!! Its a win, win situation, if i had the money, id buy some, just check for sure they aren't DAMN good replicas, theres a lot knocking about, i had some FOX EVO 3's on my saxo before, 16" should've been aboput £500 notes+ but i got them for £200 with tyres of ebay, absolutely wicked replicas and a good wheel too, but not actual FOX wheels as far as who made them is concerned.
Similar threads
