Robo's Mk4 Ibiza FR TDI PD130 * Jabbasport

[WeeG]

Looking good mate was good to see it on the rollers. Yous till enjoying your 50+mpg for 180 ponies lol? THey were the days for me too lol

 

[J20ROBO]

A most certainly am mate. Am getting betters too average 58mpg 60 without A/C on lol

 

[rf860]

A most certainly am mate. Am getting betters too average 58mpg 60 without A/C on lol

Thats good going with the mpg! I only getting 55.8 just now It's went down since i've used tesco fuel for the last two tanks, and the engine is not as responsive and more noisey as well (compared to BP)

 

[SiLVeR]

Very good mate

 

[J20ROBO]

Thats good going with the mpg! I only getting 55.8 just now It's went down since i've used tesco fuel for the last two tanks, and the engine is not as responsive and more noisey as well (compared to BP)

A try to avoid the supermarket stuff its like water cheaper for a reason lol. Only a couple of p of a different at the end of the day extra per tank.

 

[J20ROBO]

Very good mate

Cheers mate

 

[J20ROBO]

Well it all began with the motion to fix my washer jets yesterday(pipe had basically popped off at washer pump)
So having taken one alloy off to get access took a motion to give them a right good clean and wax.
Before and After>

Once cleaned came across something interesting Standard FR wheels are Ronal's lol

 

[ScottHmk4]

Well it all began with the motion to fix my washer jets yesterday(pipe had basically popped off at washer pump)
So having taken one alloy off to get access took a motion to give them a right good clean and wax.
Before and After>

Once cleaned came across something interesting Standard FR wheels are Ronal's lol

Good going with the cleaning, never knew they were ronals. Good find

 

[hoggy90]

have you fitted the pd 160 intake yet mate and the 'cone in a box'?
i went to g.i to get more out the leon and was told by a lad down there called paige to purchase a fabia vrs air box so i could get a 'cone in a box' and also to fit the pd160 intake.....you seen any difference? you got any pics of it?

 

[J20ROBO]

have you fitted the pd 160 intake yet mate and the 'cone in a box'?
i went to g.i to get more out the leon and was told by a lad down there called paige to purchase a fabia vrs air box so i could get a 'cone in a box' and also to fit the pd160 intake.....you seen any difference? you got any pics of it?

Alright mate tbh theres nothing to look at just looks oem. which is what a like about it. Gains a ever so slight but every little helps. Would recommend it to anyone who wish to make gains using oem airbox. How ever in your case you would need to buy a ibiza or fabia airbox so your taking at least £50 used pd160 intake £75 then another £80 fir the cone in a box filter. So thats 205 sheets in total??? Seems silly bud. Why not just buy a proper cold encolsed intake like a BMC CDA or viper systems with guarntee you 10bhp gains for that kind of money???

 

[J20ROBO]

Spot the difference!

 

[aaronipswich]

Looking great what other mods you got planned

 

[J20ROBO]

Looking great what other mods you got planned

Well am building upto going stage2 Jabba 220bhp+ but its not going to happen overnight. Got bills and holidays have to be payed for first you see, not to mention MOT too unfortunately.
So am putting aside a bit by each week, next purchase is either going to be a Full Miltek exhaust or Seat Sport FMIC or a may lower it first not decided yet.

 

[lexyy]

Its coming along well mate

 

[J20ROBO]

Its coming along well mate

Cheers mate

 

[mick-fr]

Looks good mate! Nice gains on the map too!

 

[seanaldo1987]

ditch buying the over the shelf milltek mate, get GI to do your full system. will cost a fraction of the milltek and you get 1st class service.

you should see the job the done on my bros fabia, its 1st class, and has a nice wee rumble off it when on full chat almost non-derv sounding.
its a 2.5" decat system from the downpipe back.

if your wanting a wee look at it give us a shout and i'm sure my bro will let me bring it round

 

[knight85]

looks good pal, very similar to mine

i have all your mods so far...had my TBE milltek on for about 6 months and love it,

also upgrading the brakes to 312mm make a huge diffwerence, as will RARB, dropping it a few mm, rear spacers and cupra wishbone bushes!

keep up top work!

 

[J20ROBO]

seanaldo1987

ditch buying the over the shelf milltek mate, get GI to do your full system. will cost a fraction of the milltek and you get 1st class service.

you should see the job the done on my bros fabia, its 1st class, and has a nice wee rumble off it when on full chat almost non-derv sounding.
its a 2.5" decat system from the downpipe back.

if your wanting a wee look at it give us a shout and i'm sure my bro will let me bring it round

Never thought! Forgot GI did fabrication too lol.
Ayee mate need to give us a lookie and a listen.
A was considering Mercat over Miltek but now scott doesn't work there theres no discount.



knight85: Cheers bud. A had a quick look through your build thread, yess very simliar lol. As too a few mm> that is what am debating to myself after MOT is done & dusted, whats first lowering the Ibiza or purchasing a full exhaust system

 

[knight85]

up to you...both? haha