Single > Dual Exhaust.... how?

[Xe]

Hi all, what is the best way to get a dual exhaust setup like in the picture below on a currently single exhaust 1.9 TDi Stylance? Also can anyone post pics if they have the single Seat exhaust trim fitted, as the photos on the Seat website are to close to see how they would look.

Don't want anything in your face style, just something neat and refined to fill the space better then the OEM pea-shooter

Thanks

 

[rubble2]

Hi,
Sorry to hijack your thread - don't know the answer to your exhaust question as I have a 2.0TDI,but I notice in your signature that you have an armrest which doesn't sound like the standard Seat one. Any details on where to get it from and how much? a picture would be great, thanks

 

[Xe]

Hi,
Sorry to hijack your thread - don't know the answer to your exhaust question as I have a 2.0TDI,but I notice in your signature that you have an armrest which doesn't sound like the standard Seat one. Any details on where to get it from and how much? a picture would be great, thanks

OK I have linked to my original Armrest thread, and added info of where you can purchase from at the bottom of the first post. I highly recommend this armrest, really comfortable, and better then the Seat version in my opinion. I have also combined it with a iPod dock. Good luck.

Armrest Combo

Any Exhaust trim buffs?

 

[DanGB]

cut the end off and put a exhaust trim on. (Y shape thing) have a look on Ebay.

 

[Cuprito]

 

[Xe]

Thanks for posting that Cuprito. Is that your car? Looks sweet.

If so could you give me a step by step guide. Like how the hell do you go about cutting it back, and where did you purchase that exhaust trim and what size is needed?

 

[lil3520]

which is the best and quickest way to cut exhaust tips.

mine bend down towards the ground, want to get 2 exhaust trims and cut bumper to allow pipes to show.

cheers

ANDY

 

[Michael B]

I like the FR exhaust, same as the GTI, very sexy looking..

 

[duncerduncs]

SEAT do an oval exhaust trim for a single pipe exhaust

http://www.seat.co.uk/generator/su/uk/SEAT/site/Service/original-accessories/main.html

It looks like it does fill the gap a bit better

 

[Xe]

SEAT do an oval exhaust trim for a single pipe exhaust

http://www.seat.co.uk/generator/su/uk/SEAT/site/Service/original-accessories/main.html

It looks like it does fill the gap a bit better

How much do Seat charge for the unit and fitting?

 

[googies]

Was the exhaust from Seat something like £40/50? buy an aftermarket one from a motor factors or accessory shop and fit yourself, all done for around £20, mine was £14 and fitted outside shop using a small socket over existing pipe, only a single, but saw single into double exits too.

 

[Xe]

Whats the best tool to use to cut the exhaust?

Also does anyone have the single Seat sports one fitted, and have a photo?

 

[Cuprito]

Thanks for posting that Cuprito. Is that your car? Looks sweet.

If so could you give me a step by step guide. Like how the hell do you go about cutting it back, and where did you purchase that exhaust trim and what size is needed?

Yep, it's my baby Thanks mate..

Everything was done in the exhaust workshop. They cut the pipe where it curves, and put a Y pipe and installed the trim. I donnow what size is it, i saw it at the workshop and said " i want this immediatly"

 

[Xe]

Can anyone tell me the size of the FR exhaust like in the picture in the first post? Are they 3 inches (75mm) each or less?

 

[megahz]

i have installed a twin exhaust with a Y pipe, i will post some picture later on.

 

[Xe]

i have installed a twin exhaust with a Y pipe, i will post some picture later on.

Sweet I look forward to it. I have found Y pipes but they all seem to be 3 inch pipes, is this bigger then the FR exhaust?

 

[Scby555]

no one do a subtle aftermarket backbox?