single

I have just bought a Seat Ibiza Fr (pick her up next week, so excited) and was looking at fitting a single din gauge holder. I have seen a lot of jap cars with these fitted, holds three gauges. Has anybody else fitted one of these? If so, you got any pictures? At the moment it has a pillar...

As the title says, dual mass or a single mass flywheel? just your opinions on the matter? which would you guy and girls go for? Cupra Tdi 54reg and upgrading with a sachs performance clutch.

Sorry. Posted it long time ago, cannot find it tho. So there is a question. Flywheel on ibiza 1.9 tdi Single or dual??? IS single very bad??? Thanks

has any done a single wiper conversion ive seen a kit on demon tweeks think it could look good. cheers ppl Dan

Hi, I have a Seat Leon MK II 1.4 TSI and sometimes when i open the driver's door the car issues a single beep and i was wondering if any of you have any idea why it would do that. I have the Coming Home feature and I always leave my lights on as the car will turn them off after 30 seconds...

hi, i fitted my single mass conversion kit about 2weeks ago which i brought from unipart as was cheap at £150, they said it was a valeo one but it came in there box with no valeo markings on the pressure plate or anything, anyway once fitted it drove fine for about 2 weeks untill this morning...

Hey, i have read and read the forum about double and single mass flywheels and clutch kits and have just got confused! i am getting a hybrid turbo from CR turbo on my PD130 FR ibiza, and need a few questions answering before i purchase the uprated clutch! 1 - do i need to change the...

OK was ringing around today for prices on clutch/flywheel replacement and asked the guy is GSF if they do a SMF for the car. He advised against it saying it will rip the new clutch to shreds as the DMF has a shock absorbing facilty? Once again I am after the advice of the knowledgeable folk? :)

im ready to upgrade my clutch and flywheel for a single mass, been pricing them up and found one at unipart which is a valeo one and is 228mm clutch plate, is this correct and has anyone used the ready to go conversion kits from GT, unipart etc. and if so are these good kits or would it be...

Ive got a double din fascia and a single din converter. When I fit a single din unit can I keep my steering wheel controls? Thanks

I have ordered a double din fascia from Dave at SERE. Will this fit in it??? It's off MK5 Golf Gti...

Not that it makes any difference to me - just a matter of interest more than anything :)... does anyone know what fuel delivery system my car uses? I have been told that it's single, but according to parkers guide it's a multipoint? I have an early 1996 N reg CLS, with an ABD code engine...

Hi mates How can i made single wiper? Can I made custom?

Price aside is this everything i need to give a man to replace my clutch? http://www.awesome-gti.co.uk/product.php?xProd=10682&xSec=356 1.9 TDI 110 ASV Engine

Hi I'm trying to get hold of a single reflector offside headlight, with little luck, and it looks like it could be cheaper/easier to get 2 twin reflectors rather than having to buy a brand new single reflector. I've done a few searches on this with not much coming up except people saying...

Does the mk1 Leon share the same wiper mechanism as the Golf Mk4? I want to get the Storm single wiper kit and they list a kit for the Golf Mk4, will it fit? http://www.rimstyle.com/pages/products/product_detail.html?category=exterior_styling;type=storm_single_wiper_kits;model=562;id=STG4-A

Hi Guys, I know a chap who has got a Octavia VRS. He's had it remapped to 225bhp. When he did this the standard clutch gave up, instead of having the OEM or uprated Dual mass clutch, he's running a single mass. He says the only differences are that the clutch is a bit jerky...

does anyone know where i can get one of these from? also im removing the rear wiper anyone know where i can get a blanking cover to cover the hole from? cheers

So the question is do you guys know what is the exact product code(s) for the 1P cupra exhaust (cat-back)? I tried to order cupra exhaust from my dealer and they offered me some two tailpipe version and they said it was the only one they could find from their system with brief searching. So I'm...

the pipes on mine have been messed with. the chap who had car of as been messin. need a diagram so i can put pipes bac to standard spec anyone help plzzzz