South Wales Cupras Chat

Status
Not open for further replies.

m0rk

sarcasm comes free
Staff member
May 19, 2001
27,787
33
Clanfield, UK
Coolio, didnt realise that, with the disks being bigger, the calipers will sit out further so should fit around my stupid spokes. Any idea whether the calipers are much fatter than the standard ibiza ones? (Stupid offset wheels)

Yeah - they're pretty broad. I am running 4mm spacers to allow some clearance.

They do work well - and are less 'grabby' than brembos - I'm looking at changing the master cylinder for a bigger one to improve pedal feel on mine
 

M90NDS

Guest
Yo guys its me again...i got a problem...drove 2 work 2 day 13mile drive no problems at all took it easy savin some juce as you do...RIGHT started the car 2 leave wotk 13hrs l8a and my abs and traction control lights came on...did a quick test and didnt have either ov them???checked the obvious fuses!

ne ov u got ne ideas othawise its a tyrip 2 seat!

Thanx Lee (Monds)
 

Jonzy

Guest
Yo guys its me again...i got a problem...drove 2 work 2 day 13mile drive no problems at all took it easy savin some juce as you do...RIGHT started the car 2 leave wotk 13hrs l8a and my abs and traction control lights came on...did a quick test and didnt have either ov them???checked the obvious fuses!

ne ov u got ne ideas othawise its a tyrip 2 seat!

Thanx Lee (Monds)

My moneys on the ABS sensor, vagcom will be able to tell properly. If it is the abs sensor its £7 for ECP and 5 min job to fit.
 

acidstrato

My Fast says shut up!
Dec 9, 2004
5,942
0
Newport, South Wales
everyone has problems, and they always seem the worst, but they usually little things


anyone fancy a meet soon? maybe somewhere slightly more neutral for everyone?

culverhouse or something?
 

Forbez

Huge Member!
Feb 11, 2004
5,878
1
S.Wales
Visit site
Coolio, didnt realise that, with the disks being bigger, the calipers will sit out further so should fit around my stupid spokes. Any idea whether the calipers are much fatter than the standard ibiza ones? (Stupid offset wheels)

Yeah - they're pretty broad. I am running 4mm spacers to allow some clearance.

They do work well - and are less 'grabby' than brembos - I'm looking at changing the master cylinder for a bigger one to improve pedal feel on mine


Wicked Cheers Mork, i had to run spacers 5mm, but could use 3mm, on my alloys over standard brakes, so maybe, 5mm would be ok with the 312mm brakes.

Cheers for that,

Happy New FMIC Carl!

Phil, I dont like horses, they are pointless animals!
 
Status
Not open for further replies.
Adrian Flux insurance services - discount for forum members.