Hello, maybe someone had same problem.
MY CAR: Seat Leon 1.9tdi BLS 2008
Donor Car:. Seat altea Diesel 2005
Have access to: VCDS
Vag Commander
ODIS(but without online access)
Gutmann MM77
Bosch KTS550
I bought instrument cluster from higher mentioned Altea. And started process of replacing, but stuck.
Have read immo information from Leon instrument panel and written this immo info in Altea instrument panel succesfully. ( With Vag commander)
But in next step when i need to do coding on immo with VCDS. ( Using Immo 4 CLUSTER REPLACEMENT instructions from ROSS TECH WEBSITE)
In security acces i write in Altea speedo Pin and vcds says that it is okey.
But when i am in Adaptations-
(Adaptation - 10]
Enter 050 in "Channel Number".
I press button [Read]
and i recieve message " Channel 50 is not available "
When security access code is not used, than Adaptation section is asking for access code.
Vcds- immobiliser Fail says that key is not recognized.
Speedo shows SAFE message.
MY CAR: Seat Leon 1.9tdi BLS 2008
Donor Car:. Seat altea Diesel 2005
Have access to: VCDS
Vag Commander
ODIS(but without online access)
Gutmann MM77
Bosch KTS550
I bought instrument cluster from higher mentioned Altea. And started process of replacing, but stuck.
Have read immo information from Leon instrument panel and written this immo info in Altea instrument panel succesfully. ( With Vag commander)
But in next step when i need to do coding on immo with VCDS. ( Using Immo 4 CLUSTER REPLACEMENT instructions from ROSS TECH WEBSITE)
In security acces i write in Altea speedo Pin and vcds says that it is okey.
But when i am in Adaptations-
(Adaptation - 10]
Enter 050 in "Channel Number".
I press button [Read]
and i recieve message " Channel 50 is not available "
When security access code is not used, than Adaptation section is asking for access code.
Vcds- immobiliser Fail says that key is not recognized.
Speedo shows SAFE message.
Last edited: