mc funbot

The correct way to do an N249 bypass the full guide

mwflynn06

Active Member
Jul 27, 2011
126
1
Leeds
Followed this guide 2 days ago. Everything's been superb. This morning on way to work an EML has appeared what could it be ? Going to reset it tonight and see if it appears again. I did notice that on start up that it makes a weird noise like its hesitating to start ??
 

useyourname

Active Member
Aug 2, 2012
322
0
In a shed
I'm going to do the bypass on my AUQ tomorrow. I'll try to get pictures aswell.

In picture 13, it says:

"remove all pipe of the resistors"

I'm assuming this means once you remove the pipes only the resistors remain on the pieces you removed them from. So I don't need to purchase any resistors?

I'll also be using the T piece to include the SAI? braided hose to prevent the fault code.

Thanks.
 

mc funbot

its a beast its got boost
Jan 29, 2010
1,473
4
sunny kettering
www.seatcupra.net
yeah thats the 1 mate. T in to sai stops that being at fault. yes remove all the vac off the n249 plugs and the put it back on. that way the n249 works as a resister and can do its thing. any probs just ask.
 

turbomick

onvi yellow cupra r
Apr 12, 2011
401
1
halifax
hey guys and gals after having a slight debate over the way to do an n249 bypass
this is how i would do it,i like to know your views on it.i see alot of people only doing half a job.a random guy with a 1.8t leon agreed to let me do this.it had a cat back exhaust an a air filter.this took me 25 mins to do.that was with taking photos and telling the lad what i was doing..

lets get started this is simple and a great mod ive done it to all my 1.8t cars from standard mk4 golfs to my mk3 ibiza at 340bhp

tools needed
IMG_1904_zps3bc59437.jpg

this is what you will start with
IMG_1878-1_zpscbf9aa5f.jpg

IMG_1879-1_zpsbb91283b.jpg

IMG_1880_zps6a0a35e0.jpg

this is what you will have removed
IMG_1881_zpsbd2d1b5f.jpg

IMG_1882-1_zps440387a8.jpg

IMG_1883-1_zpsddaff0c3.jpg

IMG_1885-1_zps745a4a56.jpg

IMG_1884-1_zpse69d19a2.jpg

IMG_1886-1_zps9f3d2348.jpg

IMG_1887-1_zpsacf6a867.jpg

IMG_1888-1_zps964c72f4.jpg

IMG_1889_zpsda5c81f0.jpg

IMG_1892-1_zps64314887.jpg

IMG_1894_zpsea80ec56.jpg

IMG_1895_zpsf009a885.jpg

IMG_1893_zps0b1a4ed0.jpg

IMG_1896_zpsfbd38da3.jpg

IMG_1898_zps72a4287b.jpg

IMG_1899_zpsc695d567.jpg

IMG_1890_zps5c1eb04d.jpg

IMG_1900_zpsc0397332.jpg

IMG_1901_zps0ba5afd3.jpg

IMG_1902_zps758d6c58.jpg

IMG_1905_zps48f6936d.jpg

your work is good now reward your self with a beer and a pat on the back!
IMG_1906_zps2e5e241d.jpg

IMG_1907_zpsda001059.jpg

this is all the rubbish that you should have removed..
IMG_1908_zps9098c3fe.jpg

i hope this helps you guys an ive never had any problems just improve ments not engin lights on..




Hi mate so to do the n211 and n249 by pass but keep the sai pump I just go from inlet to dv then t in to dv to the pipe you blocked. Leave every thing pluged in and no faults should pop on vag com
 

turbomick

onvi yellow cupra r
Apr 12, 2011
401
1
halifax
Cheers mate ive been getting the code on vagcom for pressure drop between turbo and throttle body so gonna try this as it says it could be faulty n249
 

kiemcd

Active Member
Mar 12, 2016
46
1
Followed this guide on my Cupra 20vt 180 AUQ car boosts stronger and sounds great!
Been done for approx 1-2 weeks now and had the dreaded eml appear but not bothered.. Going to sack off the whole sai system next.

Sorry to bump old thread btw
 
Chris Knott Insurance - Competitive quotes for forum members