Todays RR Results.......

[Beaker™]

Me and Olly20vT went to Stealth today to dyno our cars for the 1st time......

218.1BHP @ 4779RPM & 261.0 lb/ft @ 3729RPM

Thought mine did quite well taking in to account that it still has a standard CAT!

253.6BHP @ 5183RPM & 275.5 lb/ft @ 4189RPM

Olly's results were also very good!


Oh and Olly found a train on the way back!

 

[chrisbond69]

sounds good where is stealth? whats olly running for 253 bhp

 

[Forbez]

Slack rollers at stealth!








LOL only joking, that wickeds results on both sides!

Both look good too!

 

[Daz_gibbo]

Nice results

 

[Beaker™]

sounds good where is stealth? whats olly running for 253 bhp

I have no idea where it was (warickshire maybe) went out last night and had 1hr sleep so didnt really pay much attention to where we were going.

Ollys spec....

Toora T240 17's - Forge 007p - Dynatwist - Eibach 15mm rear wheel spacers - Boost guage in nomad pillar - Custom Code - Seat sport lowered - Seat sport strut brace - AM-motorspot 3" downpipe and sports cat - Jetex 2.5"cat back exhaust - Ferodo DS2500 pads on ATE power discs - LCR front splitter - Forge FMIC - Small mirror (drivers side) - Ko3sport - Forge ibiza TIP - Aero wipers all round - Bonnet lifters

 

[Beaker™]

Slack rollers at stealth!








LOL only joking, that wickeds results on both sides!

Both look good too!

Yeah we have been told that Stealths rollers good give results, but hey.... who cares!

 

[Daz_gibbo]

Beaker, how about your spec for 218bhp?

 

[chrisbond69]

thats the spec im after and sounds good at 253 bhp cheers beaker u both from stroud im a bit of a lone one in cirencester dont think anyone else on here from near me

 

[Daz_gibbo]

Ahh, found it on link in Sig!

 

[Beaker™]

Stealth Racing UK LTD
6 8 12 Warwick House Industrial Park
Banbury Road
Southham
Warwickshire
CV47 2PT

 

[Olly20VT]

Thanks for posting the train pics mate !
Very happy with mine almost makes it worth the thousands of pounds iv spent on it

Note to self... dont let beaker map read

 

[Beaker™]

My spec...

Engine
- 1.8T 20v
- REVO Remap
- BMC CDA Cold Air Induction
- Neuspeed Turbo Intake Pipe
- Neuspeed Power Gasket
- Yellow Samco Hoses (Intercooler)
- Bailey DV30 Dump Valve

Exhaust
- Standard CAT
- 2.5" Jetex Mid (Mid Box Removed)
- Jetex Rear Silencer

 

[Daz_gibbo]

Mk3 not 1700kg by the way! 1119kg is curb but most come to a lil higher than that.

 

[Beaker™]

Note to self... dont let beaker map read

Hey! We got back in the end!

 

[acidstrato]

if they are out i wouldnt think they are that much out??

just think only 30odd behind olly and he has bigger turbo, 3" DP with a hiflow cat and a fmic,

 

[Beaker™]

Mk3 not 1700kg by the way! 1119kg is curb but most come to a lil higher than that.

I must be thinking of something else then.....

 

[Beaker™]

if they are out i wouldnt think they are that much out??

just think only 30odd behind olly and he has bigger turbo, 3" DP with a hiflow cat and a fmic,

I know and a Custom Code remap, that makes me happy

 

[Daz_gibbo]

But higher sustained power and also across a larger band of the revs too I would guess at..

 

[Forbez]

With a sombrero and a straw donkey i hear!!

LOL

 

[Beaker™]

But higher sustained power and also across a larger band of the revs too I would guess at..

Yeah his does hold boost for longer and is probably more consistant too. Also we found that his pulls a little better after 120mph