Under seat storage boxes

[adambolus]

at the pic,

but i found mine tight towards the end. cant remember what they were like now tho, i know they were black with a small cut out at the leading end of the screw.

 

[Trotski]

I think that's the way they are meant to be, 'cause they're self tapping, it gets a bit tight at the end!

 

[johnbev]

I used a small socket set, with a torx bit in the end. Much easier to ratchet up than a flexible screwdriver with the bit. I did mine without removing seats. I did remove the one screw from the leading edge of the side trim as the new screw head seems to sit under the trim. Then refit last. Hardest bit was getting my eyes to focus

 

[thePHILosipher]

Thats fine as the ones I got werent self tappers, they were bolt, so I used self tapping screws in the end which solved the issue lol

Sent from my X10i

 

[M30 SCK]

Thanks for the how to guide, found it really useful.

One thing I found which made the job that little bit easier was to secure the seat with the belt from the rear passed over the seat your working on and secured in the front

It made the seat a lot more stable and couldn't move around.

 

[kanyewest]

i cant see the photos, i wonder if this could be done to the 6L/mk4 by any chance?

 

[RUM4MO]

You would really need to find an old version of the official parts listing as it should show what could be bought etc. If it helps, my wife's previous Polo, a 2002 9N one came with under seat storage drawers, typically the box of the drawers remains the same, it is just the front trim that needs to be different to suit in your case the 6L Ibiza.