I have just got the hex+can cable and latest VCDS i am in Cirencester/Swindon area and at weekends I am up Eveshame/Pershore area. If anyone needs a scan ect PM me.
 
Same here just got a registered lead and the latest version of the software right upto oct 2011 so all the current cars

Manchester PM if you need anything

Tristan
 
Hi,
Does anyone have VAG-COM in the Luton, Bedfordshire area?

I have the Tractional Control, ECP and Engine warning lights all come on within a week of each other. I've taken it to two local places and they haven't been able to get a usable code out of the car.

It's an 06 Leon TFSI Sport.

Cheers
Spencer
 
Bishops Stortford, near stansted airport
i do not have full vagcom, an im sure the purists out there will turn there noses up, but the handheld faultcode reader i have may be just what you need, ifso feel free to get in contact! diagnosis the faults an puts out the annoying lights!! simples. thanks
 
Got an ebay usb OBD2 lead and vag com 409.1.

Also got a serial cable and VDS Pro so can do windows up/down with remote etc.

Vag tacho lead and sofware too for programming of new keys etc

In York.

Phil
 
Last edited:
ross teck hex+can full 2001

located east kilbride near glasgow ,text me on 07850805761
 
ross tech hex+can full 2011

located east kilbride near glasgow ,text me on 07850805761
 
Hi

I have Full Vag-Com and I Have the RNS510 Service Tool VIM and New Pin
Retrofitting and Coding
Location: NR31
 
Im new on here, still finding my way round! ....
 
Last edited by a moderator:
I've got a fully licensed Vag Com cable and running the up to date version of the software.

Based in Norwich.

Drop me a line if you need any help
 
Anyone around in bmth over next few days to help newbie out who does not have a clue! lol. Failing that i might be around sheffield at the weekend . Any help appreciated.
 
VCDS (VAGCOM)

Hi I've just received my fully-registered vagcom lead and software.
Complete newbie at this at the minute, but i'm sure i'll pick it up eventually.

I'm in the Worksop, near Sheffield (Nottinghamshire) area during the week and at Sunderland (Tyne&Wear) on weekends.

Any queries or if someone is willing to give me a bit of training give me a PM

Daryl
 
Anyone near Plymouth that could do an egr delete? I have a tdi 2.0 Altea sport. Thanks!
 
Last edited:
HELP! Someone to diagnose some faults in Glasgow area please

Is there anyone in the Glasgow area who can read a fault for me. My engine management light is on. I paid a guy to read it and then arrange for him to repair the car but he never came back to me after I paid for the diagnostics! I need someone who can diagnose this properly so I know if it is a repair I can carry out or not. I'm in Lanark but work in Glasgow so anywhere en-route would be ideal.