-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
What did you and your MK2 do today?
- Thread starter Tfsi_Mike
- Start date
Oil, filter and plugs changed. A massive difference, and only 6000 miles between service too...
Like Jarre said no. And I don't no why they dropped the speedo/rev counters surround and the white needles. It's one thing I really like about mine.
Sent from my iPhone using Tapatalk
Unpacked my twin BCS exhaust today (Cupra R)
Top quality on the complete exhaust and all weldings made.
I will polish the Y-pipe to mirror finish to blend with the exhaust tips.
The tips will be painted black inside.
Installation is planned in March.
BR
Robert
Top quality on the complete exhaust and all weldings made.
I will polish the Y-pipe to mirror finish to blend with the exhaust tips.
The tips will be painted black inside.
Installation is planned in March.
BR
Robert
I went for the cat-back system.
With my map and EVOMS intake, I would estimate that I am roughly somewhere at 320 HP.
With the down pipe and 200 cell cat, I have to change the clutch. At this stage the clutch is fine, however my car has only run 2000 km in total
Well it took sometime and thinking but I got the arm rest to sit lower and work fine,,, hes some pics...
£40.20 including postage, same colour as the seats, the screws will be colour black just ran out of time today.the carbon wrap is what I use outside......
well what do you think????
£40.20 including postage, same colour as the seats, the screws will be colour black just ran out of time today.the carbon wrap is what I use outside......
well what do you think????
^^ Looking good. Mine arrived this morning and I know what you mean about the height.
Did you have to cut the metal post to get it dropped down as well as trimming the plastic?
Did you have to cut the metal post to get it dropped down as well as trimming the plastic?
Well it took sometime and thinking but I got the arm rest to sit lower and work fine,,, hes some pics...
£40.20 including postage, same colour as the seats, the screws will be colour black just ran out of time today.the carbon wrap is what I use outside......
well what do you think????
Is that a mk1 leon arm rest?
Looks a bit like my old modified renault Clio arm rest lol
Last edited:
No its for the mk2 it fits into the slot/little pocket behind the handbrake, where you'dput your stuff if you were sat in the back.it just slots in and screw it down..
went a drive to Falkirk to skidz look at some wheels , car has decided to not to produce power now , doesn't seam to be boosting properly , turbo is spinning fine but no power . slow drive home just incase now trying to figure out whats wrong 
Right bare with me on this as its a lttle completed, 1st I cut off the plastic base the arm rest sits on . basically the arm rest sits down on that angled piece of plastic the top plate of the empty box that you screw down.
Next you take the angled piece of plastic and put it under the top screw down plate to aid keeping the arm frommoving around to much....still with me!!! Next the plastic angled piece which is now under the plate movesaround as you move the arm, to provent it moving around I got a thick thick piece of round cardboard tube cur it to 130mm long and cut out the shape of the angled cut off plastic.
This tube acts as a stabiliser to stop the arm bit moving around in the box, I tie wrapped the ally arm and plastic to the tube then incase it in duck tape, then pushed it down into the empty hole that the ally arm would sit in and screwed the lid on...hey presto the arm tilts up & down but doesnt move around other than up&down..
Its fiddly and takes sometime to do. on mine everthings hidden and it just looks factory done...believe me I spent hours figuring it out before I did it....phew is that clear as mud...
I will start looking at this tomorrow. Appreciate the guide.
May have a few questions when I get started though.
I live in huddersfield so nearly on the moors and find this a lot. Some times it feels like your not going anywhere with how windy it gets. Lol.
Sent from my iPhone using Tapatalk
It's the first car I've had where the wipers park vertically rather than horizontally and they just seemed to lift off the screen really easy when the high winds got hold of them, I was genuinely worried they were going to end up breaking.
On a more sore note my wind deflectors arrived today through the postbox with a delivery note stating arrived to us in this condition, i got them 2nd hand off ebay basically the ends the bit that goes down by the wing mirtirs were snapped in half..
So i've now had to order brand new ones so in total have spent £52.00 on £32.00 wind deflectors!!
The seller is being a w__ker & saying all ok went i sent them, im proper pi__ed over it i've always refunded when items i've sent have been faulty, hes refusing point blank so im opening an ebay case which no doubt i'll lose..
anyway rant over...
The seller is being a w__ker & saying all ok went i sent them, im proper pi__ed over it i've always refunded when items i've sent have been faulty, hes refusing point blank so im opening an ebay case which no doubt i'll lose..
anyway rant over...
Similar threads
