What did you and your MK2 do today?

[Mandu]

It is turborevs downpipe on ebay. 150 £
Works well. If flex part cracks I weld new one. Easy to install.
Heat wrap is magmawrap from thermalvelocity.

 

[Mikey-D]

Cheers Mandu. Have you seen any gains? Did yours crack? Did it come with gaskets needed to fit?

 

[Mandu]

Cheers Mandu. Have you seen any gains? Did yours crack? Did it come with gaskets needed to fit?

I really recommend that downpipe. I have not yet used car on dyno, but I can say it make really different. it had been installed only a month, no cracks, so far so good. Only downside is "check engine light" because decat. But it leaves after re-programmed.
I bought new gasket but it came after the installation. My car has 74tkm on the clock and gasket was good condition, because it was made ​​of stainless steel. So no need to new gasket.

 

[Mikey-D]

That's great buddy thanks. If the quality is decent enough I think I'll buy this

My K1 has 40k so gasket should be fine. Will it fit straight onto the original OEM exhaust?

 

[gmc1991]

All fixed just waiting for the pop screw things for top of grill to hold it found the parts in scrap yard on a cat b leon had roof cut off lol

These came so fitted

Sent from my GT-I9505 using Tapatalk 2

 

[Mandu]

That's great buddy thanks. If the quality is decent enough I think I'll buy this

My K1 has 40k so gasket should be fine. Will it fit straight onto the original OEM exhaust?

Well, I have simmons cat-back, but it will be straight fit to OEM cat-back (2,5" reduce)

 

[Robley]

Mines out for a full service & MOT.

But got a full pack exeo 13 plate as courtesy car

 

[Mikey-D]

Cheers Mandu. I'll get it ordered.

Another question, how much of the magmashield (gold CF effect tape) did you need to wrap the p-flo intake pipe? I think it's 40mm wide and either 5m or 10m in length?

Cheers and sorry for the 101 Q's!

 

[benj1989]

Drove 200miles with 3 people and a buggy in the boot on just £20. Was very happy with that.

Sent from my HTC One using Tapatalk 2

 

[WeeG]

Changed coilpacks and spark plugs today

 

[snailz]

Yesterday I got myself a revo stage one remap and a revo stage one on my dsg box!

 

[p11lkw]

Yesterday I got myself a revo stage one remap and a revo stage one on my dsg box!

What's the remap on the dsg box like and what's the cost ?

 

[shnazzle]

Yesterday I got myself a revo stage one remap and a revo stage one on my dsg box!

It's great on DSG isn't it?
Constant pull. None of that lurching forward business

Except for that my D mode is now as good as useless under 50mph. Oh well boohoo

 

[Mandu]

Cheers Mandu. I'll get it ordered.

Another question, how much of the magmashield (gold CF effect tape) did you need to wrap the p-flo intake pipe? I think it's 40mm wide and either 5m or 10m in length?

Cheers and sorry for the 101 Q's!

I bought this on thermalvelocity 1x Magmashield Tape 40mm x 10m (MST/040/10)
Still left little bit. Takes about 6meters.

Sorry about dirty engine bay.

Heatwrap to downpipe first section (before v-band) takes about 4-5meters.

 

[Mikey-D]

Thanks mate. That looks better than what is imagined! Looks freaking awesome!

I'm guessing you took the pipe off to do that?

 

[Mandu]

Yes, I took my p-flo off to wrap.

 

[Mikey-D]

Cheers man. Top job there!

 

[Mandu]

Thank's mate. You’re welcome

 

[gmc1991]

Think I got auto glym obsession

Sent from my GT-I9505 using Tapatalk 2

 

[RobFR]

Order 2 Goodyear Eagle F1 Assymetric 2 to replace the Pirelli P Zero's.
Already have some Goodyears on teh back, so hoping they will give better grip on the front than the Pirelli.