Not what I did to the Leon but what a bin done! Blew into the rear inner light and wrecked it!:(
 
Today I finalised the installation of the diffuser for the twin BCS exhaust.
The cut out and riveting is finished and the parts ready for paint.
The main bumper inlay will be gloss black (041) and probably I will go for the titanium gloss colour on the diffuser (8AU). The titanium will then go with my rims.
However I have my thoughts....should I go safe - gloss black also on the diffuser?
 
Took my little 1.2 TSI for his first (short) drive on an open road ... I'm quite impressed (for a 1.2) ... Now to start saving up for a decent set of boots and get him booked in for a JD Enginering remap (Dutch VAG Tuning specialists)


Good maps those. The 1.2s seem to map well and get a lot of bang for your buck
 
Fitted one steel rim with Continental 125/70/18 today..... Was a F....Y.. moment of the day :(

image-30.jpg
 
Took my little 1.2 TSI for his first (short) drive on an open road ... I'm quite impressed (for a 1.2) ... Now to start saving up for a decent set of boots and get him booked in for a JD Enginering remap (Dutch VAG Tuning specialists)


I still miss my 1.2TSi. I had that remapped by a local tuner and it was running 129bhp.
 
Swapped out my cam follower today, very little wear on the one I took off, a small spot where the coating had worn off but there was plenty of life left in it.
 
Pickup my 10mm hub centric spacers for the front, so no have 10mm front 15mm rear hub centric spacers longer lockers arrived today, just waiting for longer wheel bolts to arrive then when a dry day arrives i can fit it all on....

hopefully the setup will be spot on..
 
Went to stealers had new external temp probe fitted , dropped car off at 8.15 was done by lunchtime, first experience of Seat Star City and so far so good.... booked in for service in a couple of weeks.... :)