Fitting is simple. You need 12 x 25mm self tappers. Along the edge of the splitter you need to space the screw points out. The
problem however with the splitter, and the reason i took it off, is because the FR/
Cupra has a ''raised'' middle section it leaves the splitter ''hanging'' and able to be snug against the bumper. This to me looked crap after a while and really tacky.
You can see on the pic above what i mean about the raised centre bit. From the side view you can see through the splitter onto the ground which isnt how it should be
I have pics of mine on the link below