what size speaker can i fit to my mk1 leon fr 150

[adam cupra 20vt]

I used 0 Gauge into a splitter then 2 gauge in my Ibiza so you imagin the trouble I had with that!

1 Genises 4 channel to power the fronts and rears.

2 15" Kicker Solabarics and a Genisis monoblock..used to rock fairly

Unless your going to do it properly I wouldn't bother to upgrade at all....I actually think the standard leon sound system is pretty good and all I have at the moment is a Alpine headunit.

 

[MrBen2k7]

I used 0 Gauge into a splitter then 2 gauge in my Ibiza so you imagin the trouble I had with that!

1 Genises 4 channel to power the fronts and rears.

2 15" Kicker Solabarics and a Genisis monoblock..used to rock fairly

Unless your going to do it properly I wouldn't bother to upgrade at all....I actually think the standard leon sound system is pretty good and all I have at the moment is a Alpine headunit.

I put my h/u in before my sub etc, and jsut the uprated amp is enough to make the standard stuff sounds ace... can't faul it!

Next on my hit list...

http://caraudiosecurity.com/shop/product/products_id/10404.html - Front

http://caraudiosecurity.com/shop/product/products_id/11440.html - Rear

http://caraudiosecurity.com/shop/product/products_id/5318.html - Power

http://caraudiosecurity.com/shop/product/products_id/2463.html

 

[adam cupra 20vt]

Those Focal components are very nice mate I had a set of the older ones

That amp is bloody good value....proper RMS power to!

I'm not planning on upgrading mine cause I'd only get carried away and end up spending about 3.5k on audio like before..........madness I could have bought another half decent car for that

 

[andi leon frtdi]

Right the whole point of this is coz really dont want to be carrying the head unit front.
I'd rather people didn't see i have a after market radio.

Right ! The set up i have is ok.
Alpine head unit CDA-9833R (yes 3 preouts) which i don't want to use.
Alpine TYPE R component SPR 176A,
Alpine TYPE R 12 sub,
Alpine V12 4/3/2 channel MRV-F340 amp,
Alpine V12 mrd m500 mono amp,
Power cap,
all top dollar wires.

 

[MrBen2k7]

Those Focal components are very nice mate I had a set of the older ones

That amp is bloody good value....proper RMS power to!

I'm not planning on upgrading mine cause I'd only get carried away and end up spending about 3.5k on audio like before..........madness I could have bought another half decent car for that

haha, tell me about it, i ad like £900 in my fiesta MK3 haha!

 

[MrBen2k7]

Right the whole point of this is coz really dont want to be carrying the head unit front.
I'd rather people didn't see i have a after market radio.

Right ! The set up i have is ok.
Alpine head unit CDA-9833R (yes 3 preouts) which i don't want to use.
Alpine TYPE R component SPR 176A,
Alpine TYPE R 12 sub,
Alpine V12 4/3/2 channel MRV-F340 amp,
Alpine V12 mrd m500 mono amp,
Power cap,
all top dollar wires.

Yeh, that's all good and well... but you cannot use it with an OEM h/u

I don't even understand your question anymore... as we answer what you ask, then you ask something else :S....

 

[MrBen2k7]

speaker wire to one amp then pre outs to the sub amp. coz i was fed up taking the front with me everywhere when i was in my pug.

ohhhhh.... I get it, u don't like taking the fascia out?

Trust your Leons alarm mate.... fit it properly, and it's not going anywhere... I leave mine in all the time... and my H/U was nearly £300!

 

[adam cupra 20vt]

Or another option is to sell the alpine and buy a sony head unit, alot of the sonys look stealth OEM fitment.

 

[MrBen2k7]

True... but... Alpine vs Sony... for quality sound, only one winner there....

 

[adam cupra 20vt]

Yep....especially when you already have a £350 Alpine with 3 4V preouts!!!

 

[JamesL]

so you have all that gear and you decide you dont wanna use the aftermarket HU? wtf, what was the point in buying it then

 

[MrBen2k7]

Yep....especially when you already have a £350 Alpine with 3 4V preouts!!!

hehe, I can't help it, I got a soft spot for shiny things....