wrong coilovers or not??

[tarzan]

got my TA-TECHNIX coilovers today but i the tuv paper it says ibiza 6k1 polo 6n1 and cordoba 6k2 i got ibiza cupra 6k2.with 865 front 760 back.the dealer sent after a document number two that says 900 front 790 back are they right or not what do you think?? the here are som pictures
front

bak

so just need so white grease and do it like on this picture from philW

 

[tarzan]

someone??

 

[Adam R]

in relation to your question..... you have got mk2 coilovers.. they wont fit mk3's as the top mounts are very different.

the rears you have will fit but the fronts wont... send the coilies back

post edited.. as mentioned below from cupramillo...

sorry

 

[cupramillo]

He is from Norway so English is not his first language. Go easy on him!

 

[tarzan]

He is from Norway so English is not his first language. Go easy on him!

thanks every one

 

[Ibiza125]

No don't send them back.

You should have also got 'fat' springs in the post. What you do is take off the 'thin' spring and that metal cup, then put the fat spring in it's place and fit to the top mount as it will fit nicely in the new fat spring

 

[tarzan]

No don't send them back.

You should have also got 'fat' springs in the post. What you do is take off the 'thin' spring and that metal cup, then put the fat spring in it's place and fit to the top mount as it will fit nicely in the new fat spring

got no fat spring

 

[tarzan]

here are some pictures
the coilover

then the top mount

and then you se the problem with the spring

 

[connar92]

i want to put 40mm drop on my cordoba with apex springs... but was wondering if you have to upgrade the anti roll bars for this or not??? and if anything else needs to be done to the car for this??