Spacers

[Cuprajohn]

Im sure i read on here about peeps puttin spacers on the back wheels. now after investigation i've found i have spacers on the front, good or bad?
im rollin on lightweight 16s with 205/40s if that makes any difference
thanks

 

[Forbez]

How thick are they mate? The fronts sit wider than the backs anyway, sot the rear spacers are more so to move the wheels into line.

I've got 5mm on my front, just to clear the calipers, will be taking that to 4mm if i can find some, as 3mm isnt enough.

 

[Cuprajohn]

bout 10/15mm no spacers on the back tho, as far as im aware it never had brembos (will one day hopefully)

 

[Deleted member 12147]

I've just fitted 10mm H&R spacer on the front. I had to put them on to get the correct offset for my wheels. Make sure they are hubcentric ones tho if they are more than 5mm.

 

[roderrs]

How thick are they mate? The fronts sit wider than the backs anyway, sot the rear spacers are more so to move the wheels into line.

I've got 5mm on my front, just to clear the calipers, will be taking that to 4mm if i can find some, as 3mm isnt enough.

ive got 3mm spacers on mine but its a bit to close for my liking so i might get the 6mm ones ive got made to 4mm a place near me specializes in metal fabricating

 

[Beaker™]

How thick are they mate? The fronts sit wider than the backs anyway, sot the rear spacers are more so to move the wheels into line.

I've got 5mm on my front, just to clear the calipers, will be taking that to 4mm if i can find some, as 3mm isnt enough.

Your local backstreet engineering firm will skim 1mm off for you for beer money more than likely

 

[Forbez]

PMSL i wouldnt have a clue where to go!!

 

[Beaker™]

PMSL i wouldnt have a clue where to go!!

Any low buget machine shop should do it. Providing of course you know where one is! lol