-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
- Status
Same place, same role but in a different department. More chance to progress.
I wont be up early Sunday thats for sure! Will catch you down there a bit later.
Got some top mount bearings on order at last! Fix list is coming down and down!
I wont be up early Sunday thats for sure! Will catch you down there a bit later.
Got some top mount bearings on order at last! Fix list is coming down and down!
Dave, bad news its 8.30 on the duals heading to junction 34, where we all met before.
Good news theres a BBQ so fingers crossed for a breakfast roll.
Good news theres a BBQ so fingers crossed for a breakfast roll.
Hmm, maybe i'll be there or meet you further along.
Stuff the BBQ,
Downside, due to illness, I'm seriously doubting the DP will be fitted.
Unless anyone knows how difficult it is to fit the DP with axle stands.
Stuff the BBQ,
Downside, due to illness, I'm seriously doubting the DP will be fitted.
Unless anyone knows how difficult it is to fit the DP with axle stands.
StanTheMan
Guest
After watching, and helping a bit with the DP, i'd say the most difficult part is jacking the car up.
Just spray the studs the night before with wd40/plus gas etc.. and you'll be fine.
Just spray the studs the night before with wd40/plus gas etc.. and you'll be fine.
StanTheMan
Guest
Matt, did you get your engine mounts from Bill?
Hes doing fast road, not race spec ones, all 3 for 172 quid delivered.
Hes doing fast road, not race spec ones, all 3 for 172 quid delivered.
StanTheMan
Guest
G'box mount:Fast Road - £64, Race - £70
Rear mount: Fast Road - £63, Race - £74
Front mount: Fast Road - £120, Race - £132
Plus vat and postage of 9.50.
Rear mount: Fast Road - £63, Race - £74
Front mount: Fast Road - £120, Race - £132
Plus vat and postage of 9.50.
StanTheMan
Guest
My car is in the garage today, rest of the cambelt being done and the interior valeted again. 
Stan, when will you be able to do the DP mate?
I can supply copious amount of Classics, and can come to you too,
Have Classics, will travel!
I can supply copious amount of Classics, and can come to you too,
Have Classics, will travel!
Phil how long did it take you to fit top mounts and bearings? Did you do it in situ? Just take top nut off and jack car up?
Longest time it took was undoing the top suspension bolt, 17mm? Big ****er in the middle. Was originally torqued on with an air gun and i couldnt get it done.
I reckon it took about 2 hours.
Jack up, wheels off, two bolts on the suspension bottom to arm, 3 strut top bolts and coliover top bolt, thats it.
I reckon it took about 2 hours.
Jack up, wheels off, two bolts on the suspension bottom to arm, 3 strut top bolts and coliover top bolt, thats it.
Daz, if you've got one a 14mm Spark plug socket will get the 17mm socket off the topof the strut.
Yeah full out job then. Wondered whether it could be done keeping them on at the bottom. Save re-allignment too then.
Will probably need alignment and lowering as th bearing add height sandwiched between the top mount and the coilover.
- Status
Similar threads
