I'm confused, have you done this or are you asking if it can be done?
Title says you've done it, post says you want to.
yes they will, for security on the purchase: s3 is the same as lcr and people fit the lcr setup to their lc's therefore they will fit, you will need the disks as they might be a different offset, not sure without looking, do you have a link to the item.
I am right in saying you want to fit the front discs/pads/calipers from a 2008 model Audi S3 onto your mk1 leon?
If so I very much doubt they will fit. Different offset/pcd on discs.
If you want to go bigger discs on a mk1 look out for some octavia vRS/anni golf/ old model S3 or TT brakes, these will bolt straight on
If so I very much doubt they will fit. Different offset/pcd on discs.
If you want to go bigger discs on a mk1 look out for some octavia vRS/anni golf/ old model S3 or TT brakes, these will bolt straight on
Last edited:
I am right in saying you want to fit the front discs/pads/calipers from a 2008 model Audi S3 onto your mk1 leon?
If so I very much doubt they will fit. Different offset/pcd on discs.
If you want to go bigger discs on a mk1 look out for some octavia vRS/anni golf/ old model S3 or TT brakes, these will bolt straight on
i understand you mate, but are there any simple mods to adapt it identical to a few PORCSHE calipers i see adapted to fit Leons and Golfs.
Are you sure? I'm not convinced mine are Brembo's. They look like an Audi in house item unless they are re-badged.
I'm pretty sure they are Audi in houses ones or like SEAT Ibiza Cupra (MK4) style ones branded as SEAT but actually a mainstream manufacturer - pretty sure its not Brembo tho.
You getting a good price on them, may be worth going down an easier route if your not getting them dirt cheap.
You getting a good price on them, may be worth going down an easier route if your not getting them dirt cheap.
i personally saw a brembo inscription on an AUDI S3 2007 model caliper.
http://www.mtm-online.de/en/index.php?nav=3&FZID=S38P195Q&Kitnum=m-1a3bre380vk
http://www.mtm-online.de/en/index.php?nav=3&FZID=S38P195Q&Kitnum=m-1a3bre380vk
I'm nearly sure the ones your talking about would be the same as these.
http://www.seatcupra.net/forums/showthread.php?t=186468&page=2
It would be easier to get a set of brakes from an earlier car then try to modify the new type s3 brakes to fit.
Offset, PCD and prob caliper carriers mountings will be different.
Exactly, new S3 does not come with brembo brakes. There's a pic of the rear of one of the calipers here.
http://cgi.ebay.de/Audi-Bremsanlage...3286.c0.m14&_trkparms=66:2|65:3|39:1|240:1318
Similar threads
