What parts from other cars fit the Leon?

[Mark300zx]

I am have seen on a few threads that there is a fair bit of changeability between the VW range, but please list any I haven't got?

Aerial Civic or citroen

Anti roll bars R32

Golf Sunglasses holder

W8 interior light

Golf MK4 aero wipers

Audi TT/R32 Pedals

 

[Hobbiniho]

any wheels from a mk4 golf or early a3 will fit directly on, seats from a s3 seem to be a common upgrade, aswell as skoda vrs half leather skoda fabia rear wiper etc search and you will find loads more

 

[Mark300zx]

It is a bit of a difficult item to search for as the search base is too diffuse.

 

[Ronin225]

I believe R32 anti roll bars are only useable if you have cupra R front suspension, so not that generic

 

[richellis]

s3 upper and lower brace
s3 illuminated vents
mk4 golf chrome boot lifters
Fabia rear wiper
touran rear wiper

 

[R@B]

I'm not 100% but i'm sure i've seen guides on here somewhere for Audi TT short shifter and S3 front lower strut brace. I've also seen Renault Laguna front aero wipers and R32 seats.

Heres a list of guides including S3 strut brace and GOLF aero wipers

www.seatcupra.net/index.php?option=com_content&task=category&sectionid=2&id=28&Itemid=6

Heres another list of very useful guides

www.seatcupra.net/index.php?option=com_content&task=category&sectionid=2&id=5&Itemid=6

And here is another list including a list of useful part numbers.

www.seatcupra.net/index.php?option=com_content&task=category&sectionid=2&id=4&Itemid=6

Hope this helps.

 

[R@B]

s3 upper and lower brace
s3 illuminated vents

Sneaky, you got there before me with the strut brace!!!

What are the vents like, any pics?

 

[richellis]

ive not done it yet. Have seen pics on here that have been done....

 

[ianv5]

Golf mark 4 arm rest fits with a few mods on the plastic!!

 

[Mark300zx]

Golf mark 4 arm rest fits with a few mods on the plastic!!

Does it fit with cupraR seats?

 

[ianv5]

Not sure about that, think golf r32 has an arm rest and me thinks seats are pretty similar to those of a cupra R.

 

[JohannSVK]

lock of back door from ibiza

 

[BCM]

Does it fit with cupraR seats?

Yup fit easy peasy!

 

[Mark300zx]

Yup fit easy peasy!

Thanks,

Can I ask if it matches the rest of the interior and what does it bolt on to?

 

[richellis]

Ive got the OEM Leon arm rest. You need to remove the little plastic tray at the back of the centre console (behind hand brake) it bolts to the handbrake mounting.
It sounds harder to do than it is!

 

[Mark300zx]

Ive got the OEM Leon arm rest. You need to remove the little plastic tray at the back of the centre console (behind hand brake) it bolts to the handbrake mounting.
It sounds harder to do than it is!

Cool is there a choice of other armrests or is it just the golf/leon option?

 

[richellis]

I dont think so, but the top covers are differant to match your trim

 

[vee_dub_modder]

i've dont the S3 upper/lower braces... was peasy i've not seen the guide mind. lol
also golf R32 (mk4) front brakes fit, cheap upgrade and you get 334mm discs .

 

[Dione J]

i've dont the S3 upper/lower braces... was peasy i've not seen the guide mind. lol
also golf R32 (mk4) front brakes fit, cheap upgrade and you get 334mm discs .

Would be intresteed in this, would this fit directly onto a LC 180 or need the calipers aswell?

 

[vee_dub_modder]

Would be intresteed in this, would this fit directly onto a LC 180 or need the calipers aswell?

which bit?? lower brace is straight fit (make sure you order riv nuts/bolts) upper is basicly a straight fit, just need to drill the turrets (remember to measure twice and cut once).

Calipers are a easy to fit also.

you need mk4 R32 calipers, carriers (see ebay) and 334mm R32 discs. oh and a pair of flexys. pull the old ones off and fit the new ones -- simples