Do it and start up a readers ride too, wish i started mine when i first got her. Missed so many things out but nevermind there will be much more to come
-
Guest, New Stock alert: Premium CUPRA valve caps now available in the store ? Order now from the merchandise store
My 20vt mk1 Leon RR
- Thread starter Miller 20vt
- Start date
tayloricedesign
Guest
My TIP turned up today 
so going to get the car in the garage tonight and start to take the bumper off ready for the fmic and try and fit the TIP tonight as well. Pics to follow later
so going to get the car in the garage tonight and start to take the bumper off ready for the fmic and try and fit the TIP tonight as well. Pics to follow latertayloricedesign
Guest
scotty86d
Guest
Will get some pics up later for ya
So far bud its about the same on fuel but i have been driving her a little harder to see what power gain/loss etc but i prefer it, still get the dump sound a little as ive drilled the air box. Once i got the fmic on this weekend i will be doing another test so i will keep ya up to date
So far i have got the bumper off and thats it, finishing work early today to crack on with getting the TIP fitted first then saturday i will be attacking the fmic and pipes. Have got one pic but will get more later and upload
Well that was a hell of a job too when you only have one arm but I got there in the end!!
Fitment was good once I got it on the turbo... BIG thanks to lee who linked me to a walk though guide!!
Heres a pick of the std and toyosports ones next to each other
Now that its done now I have started to strip the front end of her ready to get the fmic on here's how she looks atm...
Then an hour later its like this
just fine tuning it to fit perfect then crack on with the pipe work tomoro!!
Miller 20vt
Fitment was good once I got it on the turbo... BIG thanks to lee who linked me to a walk though guide!!
Heres a pick of the std and toyosports ones next to each other
Now that its done now I have started to strip the front end of her ready to get the fmic on here's how she looks atm...
Then an hour later its like this
just fine tuning it to fit perfect then crack on with the pipe work tomoro!!
Miller 20vt
tayloricedesign
Guest
So today I got up early (god forbid) and started the pipe work for the fmic and got more than I thought done in the little time I had as I'm away on a course for the next 4 days but I've left the rest of the work for my bro to do so here's what I got done....
Started by removing the old smic and the inlet pipe and then one of the screws that holds the MAP sensor in rounded off and had to drill the screw out
Once I got the MAP sensor back in I started to put the pipe work on from the inlet to the fmic loosely to make sure it wasn't hitting anything and thankfully it was all good so done up all the clamps up
And then got the pipe work which comes off of the cooler on and up to the bay but didn't take any pics....sorry
Checked how well my measurements were and how straight an level I got the cooler in and I was happy that she was spot on
Now I'm away my brother who works for SEAT main stealers has taken over and fingers crossed I will get back and she will be all done but that means there won't be any more build pics but I will take more pics once I'm back home.
Next on the buy list is a de cat down pipe and the o2 spacer...then start lookin in to a stage 2 map so any help or recommendations would be great!!
Sorry for the essay and enjoy
Miller 20vt
but I've left the rest of the work for my bro to do so here's what I got done....Started by removing the old smic and the inlet pipe and then one of the screws that holds the MAP sensor in rounded off
and had to drill the screw out
Once I got the MAP sensor back in I started to put the pipe work on from the inlet to the fmic loosely to make sure it wasn't hitting anything and thankfully it was all good so done up all the clamps up
And then got the pipe work which comes off of the cooler on and up to the bay but didn't take any pics....sorry
Checked how well my measurements were and how straight an level I got the cooler in and I was happy that she was spot on
Now I'm away my brother who works for SEAT main stealers has taken over and fingers crossed I will get back and she will be all done but that means there won't be any more build pics but I will take more pics once I'm back home.
Next on the buy list is a de cat down pipe and the o2 spacer...then start lookin in to a stage 2 map so any help or recommendations would be great!!
Sorry for the essay and enjoy
Miller 20vt
tayloricedesign
Guest
Thanks bud! i checked out your RR and seen your gonna do a few things to yours so gonna keep my eye out for when you do!
its not much of a holiday as i will be stuck in a class room learning about volvo's for 4 days
but the hotel bar is a holiday away from home tayloricedesign
Guest
SPLeon
Guest
thanks bud! the do rub a little tho but i had order some spacers but the wheel bolts wont go though the holes on the spacers
![[:@]](/forums/styles/seatcupra/oldforumsmileys/furious.gif "Furious [:@]")
but nevermind gonna have to buy some hub centric ones.... got a small update to do once my bro sends a pic, he said he got the last part of the pipe work on and had her running
happy days!!
Hey peeps! sorry for the lack of update ref to the fmic but shes all on and running well, the sound it makes is crazy too! sounds like a supercharger in some ways until 2 night ago and i blew a boost pipe of on full song in second 
but its all fixed now so happy days!!
I will get some more pics of it finished when im back from another course ive been sent on but the free dinner and booze on the company is a massive win 
Was going to get my de cat down pipe this month till the dvla had to remind me they need to rob me of more money so i may get the cupra r splitter to finish the front end off and then press on with the rest of the engine bits. Ohh and ive got another rocker cover to spray up as i cant get my engine cover back on so will get some pics sorted of that too!!
essay over but hope your all good!!
until 2 night ago and i blew a boost pipe of on full song in second but its all fixed now so happy days!!I will get some more pics of it finished when im back from another course ive been sent on
but the free dinner and booze on the company is a massive win Was going to get my de cat down pipe this month till the dvla had to remind me they need to rob me of more money so i may get the cupra r splitter to finish the front end off and then press on with the rest of the engine bits. Ohh and ive got another rocker cover to spray up as i cant get my engine cover back on so will get some pics sorted of that too!!
essay over but hope your all good!!
Similar threads
