Then why does the guide say the following: "Do not block off the hose connectors that your removed, some people have tried it and had negative performance as a result"?
A picture would be great, thanks mate!
My 20vt mk1 Leon RR
- Thread starter Miller 20vt
- Start date
A picture would be great, thanks mate!
Then why does the guide say the following: "Do not block off the hose connectors that your removed, some people have tried it and had negative performance as a result"?
A picture would be great, thanks mate!
check this guide, this is the one i used and mine is all good. its about halfway down the first page
http://www.seatcupra.net/forums/showthread.php?t=348572#
Last edited:
Mine's a bit different (BAM LCR225), so I'll check up both topics.check this guide, this is the one i used and mine is all good. its about halfway down the first page
http://www.seatcupra.net/forums/showthread.php?t=348572#
ill cast my eye over it soon!
haha cheers boss! your 20vt knowledge is far better than mine
I did the mod using a hose connector and factory hoses a few minutes ago (using this topic as a guideline), I'm going for a test drive this evening.
Ive not had any cons so cant say much sorry
The only problem is that it's raining here, so the circumstances are not the best. ![[:@]](/forums/styles/seatcupra/oldforumsmileys/furious.gif "Furious [:@]")
By the way can you check your reader's ride thread? I got a question for you there.
How much was the neuspeed p-flo induction kit? Was it easy to fit? I'm trying to decide what induction kit to fit to mine at the moment!
i got it cheap of ebay for £49 all in
easy direct fit and sounds great. would recommend it any dayWhat filter does the P-Flo use? K&N I assume?i got it cheap of ebay for £49 all in
If I'm right, can you tell me the part number of the filter itself?
Hey people! Been slack with updates as I've had a lot on my plate the last few months so I've pulled my finger out and bought myself a new presents for the motor
Best £50 I've spent on her so I know what I will be doing Saturday at work. Once its all on and I've done my inner cv boot then its off to get a stage 2 map done.
Best £50 I've spent on her
so I know what I will be doing Saturday at work. Once its all on and I've done my inner cv boot then its off to get a stage 2 map done.
it was a toyosports one off the bay....£54.99 all in you cant complain it does the trick
i dont think they do it anymore :s i just had a look and cant see them on there....
Right so a lot has happened in the last couple months with me and the motor so heres a little update...
I got my 3" downpipe and de cat fitted up and it sounds pretty sweet! not to loud but just enough and has a sweet resonated sound when coming off throttle/gear change.
So thats the good then 4 days later i had a coming together with a man hole cover that busted a hole in my sump the size of my fist (by the way im not a small lad with small hands lol) ripped my subframe apart, bent a lower arm, popped both inner and 1 outer cv boot.
Went to claim against the council for the state of the road and they said the road is in a fit state and wont pay out...so back to the drawing board and plan another letter to see if they bite at the next one cause there only gonna get worse from now.
Soooo ive just got my new subframe, powerflex dog bone bush, n/s drive shaft and o/s lower arm. Got a little bit of work to do over the next week....but at least then it will be sorted and i managed to bag all the parts new for just over £220
Once i got that all done i am going to book up my stage 2 revo map as its been over due for months now and i feel that me and the car deserve it
Sorry for the rant to whoever read this...gonna try and keep up to date with my RR
Miller20vt
I got my 3" downpipe and de cat fitted up and it sounds pretty sweet! not to loud but just enough and has a sweet resonated sound when coming off throttle/gear change.
So thats the good then 4 days later i had a coming together with a man hole cover that busted a hole in my sump the size of my fist (by the way im not a small lad with small hands lol) ripped my subframe apart, bent a lower arm, popped both inner and 1 outer cv boot.
Went to claim against the council for the state of the road and they said the road is in a fit state and wont pay out...so back to the drawing board and plan another letter to see if they bite at the next one cause there only gonna get worse from now.
Soooo ive just got my new subframe, powerflex dog bone bush, n/s drive shaft and o/s lower arm. Got a little bit of work to do over the next week....but at least then it will be sorted and i managed to bag all the parts new for just over £220
Once i got that all done i am going to book up my stage 2 revo map as its been over due for months now and i feel that me and the car deserve it
Sorry for the rant to whoever read this...gonna try and keep up to date with my RR
Miller20vt
rikhcupra
Guest
Just a quick update, found the pics from when I took my motor down regal autosport and put her on the rolling road
Miller 20vt
hi wot mods did you have on the car to get these rr results ?
cheers
at the time of that RR i had a forge 007p, neuspeed p-flo induction kit and the custom code phase one map.
Similar threads
