for people looking at creations motorsport TIP.. look inside before you buy
- Thread starter spanner87
- Start date
ok so an update,i received an email today giving a brief explanation of possibilities that caused the breakdown of the silicone (due to being out of stock when item was ordered i was sent a show item by mistake which was later remanufactured) i received a formal apology,i was also offered a replacement in black or blue and a future discount on orders of 15% plus free delivery..
well if thats not customer service and trying to please the customer i dont know what is..
my reply was along the lines of an explanation that i cant return the item until i have a replacement as i am limping the car to work and back off boost and dont have the oem item so we will see their response but so far so good!
well if thats not customer service and trying to please the customer i dont know what is..
my reply was along the lines of an explanation that i cant return the item until i have a replacement as i am limping the car to work and back off boost and dont have the oem item so we will see their response but so far so good!
I've also the CM stuff on my LC ... it's been spot on... my CM TIP looks nothing like that being compared to the FORGE unit either!!
They ripped their design off Badger5 and couldn't even provide a decent quality silicon. Absolutely disgusting, i would demand my money back as if it collaspes any further, under full load it will prevent air reaching the engine and cause it to fail.
Since when did Bill start selling these hoses?
Too many bandwagon jumpers on this forum....
i think wires were crossed, there is a Bill at CM also.
received the replacement tip today and it looks a hell of a lot better made and is bigger bore than the one i removed.
fitted it and took her for a run and f*ck me its nice to have full power again, peaked at 22psi and held 14-16psi as it should.
cant thank Bill enough for his cracking customer services.
received the replacement tip today and it looks a hell of a lot better made and is bigger bore than the one i removed.
fitted it and took her for a run and f*ck me its nice to have full power again, peaked at 22psi and held 14-16psi as it should.
cant thank Bill enough for his cracking customer services.
Don't you mean Badger wagon
.CM ripped of Bills K04 large bore TIP design. I know this since i followed the evolution of these TIPs since i made, run and proved the gains of the very first largebore k04 tip. CM have been in my gun sights ever since. Since the poster didn't list the turbo it was fitted to at first, using my eyes i wrongly assumed it was a K04-02 largebore tip.
You can sugar coat it all you want, their silicon is the rats arse of silicon. If your happy to have TIP that can potentially destroy your engine and most probably made by a lady boy with a set of nads bigger than your own then crack on my friend. (maybe thats the attraction
)Personally i would use a Forge or similar, BTW i'm sure Bill at Badger 5 would sell you one as he has a good relationship with Forge and being based in Gloucester just down the road from Forge may help also.
Not even for $10,000,000. You don't need to be a CSI to work out what will happen with that mod.
Similar threads
Model Year 23/24
Looking for help – Headlight moisture issue (Formentor)
