• Hey Guest💡👉 We have recently launched our new Dealer Directory and review service Find out more now
Re-ferbd my calipers. ( sort of)

yrybane3.jpg


9e6y4y9u.jpg



Sent from my iPhone using Tapatalk
 
Not today but this weekend got my 3" downpipe + decat fitted.

Also sorted out the horrible creaking noise going over speedbumps, chopped off the plastic covers on the ARB, cleaned all the rust up, applied loooadds of grease and fitted smaller powerflex bushes, it's so silent going over speedbumps I love it, was embarrassingly loud before.
 
Last edited:
Gave the LC180 a service, removed the rear wiper, de-badged the boot then gave it a thorough clean followed by a polish.

Tomorrow its the fun job of doing the regulator seals as got water coming in through 3 of them :thumbd:
 
What is it you recommend using to reseal them? Was thinking a silicone sealant but that might be messy
 
Driven like a pensioner it's really good, but if I start having a play it drinks it! Only had the car a month and compared to my old BMW it's great, might only be the 180 but certainly puts a smile on my face :)
 
Not looking to play with the engine too much, done 125k and my main concern would be the strain a map etc would put on the turbo. I've smoothed n drilled the air box for now until I get a filter n shield, done the n249 bypass. Going to take out the centre silencer and keep standard rear box, had a non resonated system on my a4 1.8t and that droned so much at speed. It's on Eibach sport lines, last car had coilovers and after a 300 mile round trip I thought I was gonna die from the aches! So basically it's subtle mods and gleaming paintwork
 
Today I got the windows tinted limo black, steering wheel wrapped in camo, centre console got some better carbon fibre vinyl and headlights got tinted :)

20130527_190901_zps6d04c34b.jpg

20130527_190953_zps719607ea.jpg

20130527_191008_zps01a76319.jpg

20130527_190849_zpsc66a33fb.jpg
 
Fitted the standard induction kit to my 225, so there will be a 57i and pipe on the bay soon :D
 
Picked up a toyosports exhaist.. turbo back, 3" downpipe. 2 1/2" system with resonated box. poloshed up nice.
IMG-20130527-WA0000_zpscb553b7b.jpg

fitted some point this week hopefully. along with a oil change and getting in to seat for coil recall...
 
Had my leon AUQ hybrid ko3 on the Rollers 290bhp 280 torque , plenty more in it with water meth though ,nice to finally get to the end of the project.