37f5fc9ad404c06986d070e9a6032952.jpg

Went out a cracking B road blast today since the weather was gorgeous in sunny Scotland! It's the wee drives like this that makes me love the Leon!!
 
I think the Cupra drop is 30mm because it sits 10mm lower as standard

Yes think that's spot on Rich, so it would drop an FR 40 mm but Cupra 30mm and they would look the same afterwards.

37f5fc9ad404c06986d070e9a6032952.jpg

Went out a cracking B road blast today since the weather was gorgeous in sunny Scotland! It's the wee drives like this that makes me love the Leon!!

Great shot buddy love it [B)]
 
Well 4hrs and a lot of swearing we managed to connect up the new radiator and while I was at it i thought I might aswell fit my new red d diverter valve, job well done. :cool:
 
Do it mate that will look mega [B)]

Aren't they the same as the 30mm ones part number for both is 29176-1 :shrug:

Yes think that's spot on Rich, so it would drop an FR 40 mm but Cupra 30mm and they would look the same afterwards. [B)]

Might do, can always peel it off if I don't like it.

Changed the gearbox mount today.

Car feels loads better now, and judging by the play in the old one, it wasn't offering up much support.

Took pictures throughout so will do a how to guide when I have time.

Will also give you the part number for the thread Craig.
 
Might do, can always peel it off if I don't like it.

Changed the gearbox mount today.

Car feels loads better now, and judging by the play in the old one, it wasn't offering up much support.

Took pictures throughout so will do a how to guide when I have time.

Will also give you the part number for the thread Craig.

Tidy cheers Dan ;) if you can pm me the pics and part numbers mate and I'll get them added.Need to add my couch and DMF numbers so I'll do it in one go.
 
Tidy cheers Dan ;) if you can pm me the pics and part numbers mate and I'll get them added.Need to add my couch and DMF numbers so I'll do it in one go.

Your couch lol....is this something new the rest of us dont know about haha

I will send them later tonight. Off out for some food in a min.

Wanted to do the badge too but, didnt have time with watching the F1 practice and qualifying in between working on the car. :D
 
Needed to change nsr ABS, so gathered up al manner of bits and bobs I thought i'd need and set to, heard all the horror stories of sensors breaking in the hub etc, well 20 minutes from jack under to jack out! Sensor popped out with a slight tug, spent more time aligning the bolt hole to secure it to the hub, test run and no more yellow lights, yippee.
 
My son give me a hand to put my triple r spiltter on only because he was sick of it lying around his room and thought I better put my smoked side repeaters on for good measure
 
My son give me a hand to put my triple r spiltter on only because he was sick of it lying around his room and thought I better put my smoked side repeaters on for good measure


Haha child labour! I love it! I bet the small hands helped wonders! I always need smaller hands ... Maybe one day I should produce a small handed helper...


-staytuning|staymodified