Two new Yoko AD08 front tires fitted, as the Nankang's were too loud.
You have the NS2-R before these then? Aside from the noise how would you rate them?
Sent from my iPhone using Tapatalk
-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
what have you done to your car today ?
- Thread starter seatcupramad23
- Start date
You have the NS2-R before these then? Aside from the noise how would you rate them?
Sent from my iPhone using Tapatalk
The NS2-R were pretty good in the dry, and okay on a wet road, but the sound of them drove me insane.
Last edited:
Finally got my LCR fault code free!
When I bought the car the traction light was permenantly on. Turns out it was the steering angle sensor being one full turn off.
The last code which I sorted today was egt sensor failure. Managed to remove the old one no ramp etc and fit a new one. Had to relocate the black box but all good. Cleared the codes, took the car out for a good drive and rescanned with the vagcom no codes.
Best bit is no hit the wall feeling on WOT gear changes. Ie no fuel dumping now.
Also cleaned up and relaquered my pink brembos, look like new again!
When I bought the car the traction light was permenantly on. Turns out it was the steering angle sensor being one full turn off.
The last code which I sorted today was egt sensor failure. Managed to remove the old one no ramp etc and fit a new one. Had to relocate the black box but all good. Cleared the codes, took the car out for a good drive and rescanned with the vagcom no codes.
Best bit is no hit the wall feeling on WOT gear changes. Ie no fuel dumping now.
Also cleaned up and relaquered my pink brembos, look like new again!
Last edited:
made it shine and took it to croft for the petrol and pistons car show and time trial ,,,,great day
Gave the front seats a wash with vax, sorted a niggly rattle behind the fuse box and wash/dried/oiled my green panel filter 
Smoothed out the stock airbox and made some hole's.
Saving atm for hybrid ko3 so taking advantage of "free mods"
Saving atm for hybrid ko3 so taking advantage of "free mods"
Passed MOT. replaced CV Gaitor. swapped front springs to Vogtland from my KONI setup and stuck on LCR Top mounts
Since it was a nice day I wash both mine & the Mrs cars. Then a bit more attention to mine was needed - decided to clean up and repaint my front calipers. I'd bought Por15 black caliper kit ages ago and never got round to it but it was east-peasy
First cleaned caliper with wire brush to remove all crap and sprayed with caliper cleaner:
Then washed with caliper prep - sorry didn't take a photo but safe to say it's just like a degreaser. Washed this off with water and dried then coated with rust preventative:
After 30mins (or when the coating is tacky touch dry, it was time for the first of 2 coats of the caliper paint:
I wasn't sure about the "Porsche" stickers but as the calipers were from a Boxster then it would be rude not to, eh
Took the time to clean the inside of the wheels while they were off, they weren't too bad actually
So hopefully the weather will hold up tomorrow and I'll do the rears
First cleaned caliper with wire brush to remove all crap and sprayed with caliper cleaner:
Then washed with caliper prep - sorry didn't take a photo but safe to say it's just like a degreaser. Washed this off with water and dried then coated with rust preventative:
After 30mins (or when the coating is tacky touch dry, it was time for the first of 2 coats of the caliper paint:
I wasn't sure about the "Porsche" stickers but as the calipers were from a Boxster then it would be rude not to, eh
Took the time to clean the inside of the wheels while they were off, they weren't too bad actually
So hopefully the weather will hold up tomorrow and I'll do the rears
Changed front CV boots... Which is a fricking animal of a job!
New head lights and Polo 6N top caps
New head lights and Polo 6N top caps
Fitted a new wing mirror after a golf gti took mine off at 70mph and carried on driving.....
Why Polo 6N top caps ?Changed front CV boots... Which is a fricking animal of a job!
New head lights and Polo 6N top caps
Bought a forge DV and did a DV relocate
Managed to get a K03 blank plate from Yosh at DarkArtz
The complete kit (Intake bend, Relocate pipe with holder, Forge DV, S3 throttle pipe, CTS boost tap, CTS K03 blank)
Forge DV fitted
Managed to get a K03 blank plate from Yosh at DarkArtz
The complete kit (Intake bend, Relocate pipe with holder, Forge DV, S3 throttle pipe, CTS boost tap, CTS K03 blank)
Forge DV fitted
Similar threads
