Carmats.co.uk
  • Hey Guest👍👎 We're looking for reviews of your local CUPRA or SEAT Dealership - it's quick and easy to do: Leave a review now

actuator

  1. Baggyaureol

    Missing Distribution Flap Motor

    Hi all, I've had the common B109D71 fault on my wife's Seat Leon since we bought it last year, along with blowing hot on the passenger side but cold on the driver's side (I was made aware of these faults by the private seller before I bought it.) The car in question is a 1.6tdi SE Technology...
  2. Lazar

    HVAC actuator parts cross compatability and repair

    Due to every single flap actuator failing in my climatronic system and the rarity of replacement parts in my region is it possible to gut newer working actuators (From different vents) and repair the old ones? do they share the same internals (between vents and flaps)? Any other advice is well...
    • Lazar
    • Thread
    • actuator actuators help me fix the love of my life help or advice hvac seat ibiza 1.4
    • Replies: 0
    • Forum: Ibiza Mk4 (2002-2008)

  3. 1.2 Turbo Actuator Failure or something else?

    Problems started after driving through a deep puddle. EPC and engine light. If I clear the warnings the engine light goes away then returns after 20ish minutes of driving. Error code: P226300 Hired a mobile mechanic and he thought that is was a problem with the actuator, but the error code I...

  4. Low boost

    Hi, Iv just replaced the actuator and since having issues with it, it doesn’t seem to boost like before. In second gear foot down it only shows -0.73 bar and 0.69 at idle?

  5. Limo mode tried everything

    I own a MK1 leon 90 evertime I rag it to 4k rpm in 4th gear is goes into limp mode, the turbo is 100% it's mapped but the engine I had in it previously didn't go into limp mode it boiled and swapped a new one, all the vacuums are ok, no boost leaks anywhere injector wire 3 is spliced but tested...

  6. 1.2 TSI Ibiza - P334B P334C - turbo issues

    Hi, Seat Ibiza 1.2 TSI. My car recently started entering limp mode randomly with both the EPC light and Engine Management Light appearing, went to my local garage to get it checked out and got the following code back : P334B00 - Boost Pressure Actuator - mechanical fault So, after having a...

  7. How difficult to replace a camshaft position actuator?

    My garage are quoting 7 hours of labour to replace a camshaft position actuator on my 04 Leon Cupra. Does this sound reasonable? Its annoying because they origionally quoted 1 hour of labour but now are saying it is much more difficult than they first thought. Argh! Cheers!
    • davelyne
    • Thread
    • actuator camshaft difficult position replace
    • Replies: 3
    • Forum: Leon Mk1 (2000-2006)
  8. Berg

    Hose from the actuator

    Noticed a while ago that connected to the actuator is a black hose but mine is just hanging and has a screw/bolt in the end of it blocking it off Can anyone tell me what the hose should/would have been connected to? The N249, N112 and SAI have all been removed by previous owner is it...
  9. NottsLCR

    New Actuator or just spring?

    The spring on my K04 Actuator is failing at the top end. Anyone know where I could get a new one from? I know Forge do them but unsure if these are direct replacements for standard or just for Forge’s Actuator. A spring from Forge is only £12, but if there is a good benefit to changing to...
  10. gex18

    Standard Actuator Opening Pressure

    Does anyone know what it is? I have searched but can find no info on the MK4 section, and only this one thread on the MK3 section : ttp://www.seatcupra.net/forums/showthread.php?t=237912&highlight=actuator Any info MUCH appreciated :) Many thanks Anthony
  11. sambryant

    17535 too rich, 17705 pressure loss, 17704 temp sensor -garage said actuator faulty

    took my car out 2day, it was in the garage having some work last week. the problems i had were, 17535 running too rich, 17705 pressure loss, 17704 engine temp sensor. any way the guy at the garage said its my actuator thats playing up. so i got them to fit a new 1, he checked for boost leaks...
  12. paul-murphys

    uprated actuator an wow

    i sent my hybrid off to have new seals in an decided to stick uprated actuator on my standrard ko4 an wow cant belive difference its made. boosts higher an just pulls a lot better, get 20 psi at red line, set it up to old actuator an car feels so much stronger an getting better booost an coming...
  13. paul-murphys

    actuator sound

    i have changed my turbo for a hybrid an when i let off the accelerator i get a different sound from my forge 007 would this be due to more boost an a stronger actuator or could this be causing damage? thankyou
  14. paul-murphys

    setting up actuator

    im going to fit my hybrid today but not sure how to set actuator, its uprated an its really hard to pull out an open wastegate is this normal? getting car mapped next week. how do i set it as i dont want to damage the car or turbo. im going to stay off bost when driving till cars set up...
  15. cupra_jobe

    actuator problem i think....

    Just fitted my new brakes and went for a spin after a quick blast i can hear a leak from some where i have a split in the actuator arm seal. Cr have told me it needs replacing but it hasnt been a problem in the past. Now when i boot it there is a leak sokme where and judders like mad. Is the...
  16. gazcuprablk

    actuator bolts fell out help

    im after some help if possible i was on my way home from work the other day and noticed my car sounded like a rally car coming off boost much louder than before and put my foot down and it boosted much more than before so i knew something was up so had a look at it and the bolts (the 6 allen...
  17. cupra_jobe

    actuator seal

    i noticed the other the seal on my actuator is split and leaking air..... Question one is this easily replaceable? if so where from also when i boost to about 1.6 bar after around 2-3 seconds it drops suddenly to 1.2 could this be because of the leak. or the way it has been mapped and i...
  18. wayne lcr

    ive been thinking of winding the actuator out abit

    ive been thinking of winding the actuator out abit on me lcr and just wondered if any 1 else as done this we use to do it back in me rs turbos day any info would be welcome thanks
  19. EZ Tutty

    Standard Actuator Opening Pressure...

    Hey, I've had search but struggling to find the info i need... I just want to know at what pressure should the standard k03 actuator begin to open? I've made a small test rig up, and mines beginning to open at 0.5bar (7psi), is that correct? Thanks EZT :)

  20. Adjusting the actuator for more boost on an LCR?

    Noticed it was adjustable, since I can't see anyone that has done it from searching, then I presume it plays havov with the electrics?
Progressive Parts, performance parts and tuning specialists
Top Bottom
Back