arch

hi guys does any one know where i can buy a set of wheel arch trims <flared arches > the black plasic ones like on the mk3 gti golf? my 17s have ripped the front arches to bits and need a cheap and cheerful fix without replacing the wings and jacking the suspension up and putting 15s on lol...

I was washing the car yesterday and when cleaning the arches I noticed the passenger side rear trim has got a really big split. I looks like the bit where the mud flap would be fitted. Now, I can't say how and when this has happened but I'm just curious if this is covered under warranty...

looks weird imo

does anyone know of anyone in the birmingham/coventry/west midlands area that does arch rolling/flaring? relatively cheap, but do a good job if you get what i mean? sorry if it's in the wrong section, seemed appropriate to me PM me, or [email protected]

Hi all, I am looking to fit to my car (Pre FL cupra) wider tires. the size i am interested in is 255X35X18 , fitted over 18X8.5 ET ~45 I know that in the GTi this is possible but marginal , but i have no clue about the Leon. does anyone know if that will fit (at around 2 degrees...

Had a search around and not much info regarding Leon's with rolled arch's. Has anyone done it? Is it hard to do? I would be interested to see it, i know its big on the VW scene so they can get there cars super low. Cheers

My n/s/f one cracked and became partially detached following going through a big puddle: You can see some wires which will now be subject to the usual spray/ dirt/ grime etc. How quickly should I get this replaced. Any idea how much? Cheers in advance.

I have done a search and found nothing specific just a few mentions. With the car on quite allot of lock i get the droplinks rubbing on the arch lining, has anyone else had these problems? I have had a quick look but its dark, i think you will be able to trim the arch lining back where its...

Was cleaning my LC today and noticed grease around the inside of the arch, my first thoughts (other than bollocks) was the CV joint had gone but when turning in tight circles left and right on a local car park it sounded and felt fine. The other thing is when im getting on and off drop down...

The screw at roughly the top of the arch is catching my front tyres slightly. Would I get away with taking them out?? I was thinking of cutting the black bit and tucking it behind the metal or something to keep it in place. Any other suggestions? Cheers.

Anyone know what price I'd be looking at for these? Liner to fit Cupra pre-facelift bumper and seal for rear door. Nice one

Any K1 (or standard Cupra owners for that matter) had damage to the painted side skirt that wraps to the inner wheel arch. I purchased my K1 a few weeks back, It's an easy fix / respray but was curious if this would be something SEAT would look at as a bodywork fault/warranty claim, or if it...

Hi i stupidly scraped the rear arch comin out of my garage, i now have a 6" x 0.5" graze, taken off paint and down to metal does anyone have any experience of chips away, i have it booked in for thurs, are thay any good? they have quoted 200 quid to repair this aswell as a scuff on...

Dont know if this should be in readers ride or on here but i'll give it a go anyway Well about a year ago i bought a 1998 Ibiza 16v cupra sport. I noticed the orange peel on the rear quarters didn't quite match the rest of the car, but you had to be looking seriously close to even notice! The...

:D :p :D soaked up a little too much sun this week and a little too much beer..that with a bored hungover sunday i went a tad silly! [B)] i decided to colour code my front splitter which is a tad chewed up because of the previous lowness! i thought considering there only £15 from dealers...

Morning! I have just slammed my car down on some AP coilovers and im interested as to how far down it is!! Would someone be kind enough to measure the distance from the wheel arch to the floor for me (front and rear) Many many thanks!!

Anyone know of a place that can do it? I need to get the fronts done on the Arosa, and could do without travelling the length of the country! Thanks, Ian

Hi All, I have a cracked front wheel arch liner, does anybody know where I can get them from for my LCR? Also are they easy to replace, never done one before? Cheers.

At my BSR tuner last week they pointed out my intercoolers don't breath very well and pointed at an Audi TT (which has a twin K04 setup btw !) which had both gills on the side in front of the front wheels and inside the wheel arc. OEM stuff. Comments?

sorry.....