Chris Knott Insurance - Competitive quotes for forum members
  • Hey Guest💡👉 We have just launched our new Dealer Directory and review service Find out more now

blanking

  1. wayne lcr

    Any one used a Secondary Air System Blanking Plate?

    any 1 used 1 of these http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=190202TUN&product=FMEGRBP

  2. Blanking off the EGR....?

    Hi folks, Hoping for some advice here....got a 2007 Ibiza Cupra 160 PD and was wondering if there is any benefit in blanking off the EGR as I have done on my T4 and Passat? What, if any, are the pitfalls? Are there any issues with the MOT or the ECU etc etc? Any help always apreciated...
  3. Husbandofstinky

    Does anyone have an EGR blanking plate template available?

    I'm sure I've come accross a nice picture of template in a thread some where many moons ago. The aim is to get a proper one made up ready to go. Any help would be appreciated.
  4. G2232

    Fascia blanking plate

    As the tittle suggests does anyone know of a blanking plate to close off the reccess left by the head unit and climate control? I've removed both as a weight reduction excercise but fancy capping off the dash so as to not just have a big hole
  5. ibizadoyle

    EGR blanking

    hi guys can some one tell me exactly the best way to blank your egr like does the 4mm hole trick work and is there any way to keep the light off?? thanks simon
  6. L14M_T

    Blanking egr valve

    have anyone tried in the past on a 1.2 or any other ibiza applicable,on the throttle body there's a EGR input with causes hot and contaminated air into the intake system. What id like to do is take the pipe off the throttle body and let it vent external and make a blanking plug so the throttle...
  7. blackcupra180

    what is a secondary air systym blanking plate?

    can anyone tell me what a secondary air systym blanking plate is
  8. philsip

    EGR blanking! :cry:[:@]

    Im at that stage this weekend where i am buying what i want! ive been looking up sites to buy the allard egr blanking set but its not got exactually what i fully need! http://www.egrvalve.co.uk/index.php?page=products basically im going to order the 3rd set on the link above! but i need...

  9. EGR valve blanking plate AHU

    Hey, I need a EGR valve blanking plate for a AHU engine, does anyone know where I could buy the plate, is there anyone here who could make one ? Thanks

  10. EGR Blanking plate?

    what is this used for (obviously a blanking plate yes) is this what is used when the N112 is removed?

  11. Front Fog Lights or Blanking Covers

    Have 2 x holes where I believe front fog lights or blanking covers may have originally been on my 99 Vario Est. Assume previous owner removed them for some reason and never repalced. Ideas where to find covers would be appreciated folks as 2 x holes is quite unsightly. TIA for any replies.
    • Murielson
    • Thread
    • blanking covers fog front lights
    • Replies: 9
    • Forum: Cordoba
  12. SEATCOOBER

    blanking plate for secondary air injection

    as above any one got a link, the intergrated engineering one does not work any more cheers
  13. glynnd

    egr blanking plate

    Decided to blank off my egr intake with a plate replacing the metal gasket in the pipe connecting the down pipe to the underside of the egr valve The engine check light comes on for about 50 miles and then goes out again comes on and then goes out again, this I can live with. Car now goes...

  14. EGR valve on 3 cylinder 1.2 Ibeza- blanking plug blowing off

    Hi folks, As the subject line says, the blanking plug in the base of the EGR keeps blowing out !!! We have replaced it twice and it's gone again. Perhaps we just haven't been able to fix it tight enough but we don't know too much about these things. First off - why would it blow out in...
    • Neil-R
    • Thread
    • blanking blowing cylinder egr ibeza plug valve
    • Replies: 7
    • Forum: Ibiza Mk4 (2002-2008)

  15. blanking off dump valve...

    whos had experiance with this? anyone? i know alot of turbo boys do this and wondered what the effect was on the 1.8t? HoocH
  16. fishtoasty

    Sterio Blanking Plate

    anyone any idea where i can get a decent but cheap LCR Blanking Plate for the sterio, so i can fit an aftermarket one..... Many Thanks Ross

  17. Blanking off EGR valve(s)

    I'm fairly new to PDs Who can teach me about blanking off the EGR valve?
  18. Havok316

    Is this the oil blanking plug?? inc pic

    Hi all is this the oil blanking plug for the oil temp sender?

  19. Lambda Blanking Plug

    Does anyone know where I can get a Lamba Blanking Plug from like the scooby one in the link. http://www.tsl-motorsport.co.uk/newsite/products.php?nav=300000&section=300008&detail=66 Its for a 1.4 AEX exhaust manifold, does anyone know if the 1997 AEX was fitted with a lamba sensor ?

  20. Passenger door blanking plate!

    Hi folks, had my cupra for 5 days now and loving every minute! Just one small problem- the lock blanking plate on the passenger door falls out very easily. There doesn't seem to be any broken bits and i cant hear anything rattling inside the door. I found a post on this problem from 2003...
Top Bottom
Back