breather

hi people has anyone got a oil breather filter on their car

I have suffered from petrol fumes coming in through the vents with the problem being traced to a perished/split breather pipe under the bonnet. I just recently replaced the hose shown below and have only done about a thousand mile or so before the problem reoccurred. Does anyone know of a...

hi guys im fed up with searchingi need a breather pipe on a seat cupra 8v where can i find 1 please

I have a split hose with air hissing out just to the right of the dipstick, it connects to the underside of manifold thing behind the dipstick then runs along to the right and down and connects to the rest of the breather pipes. Been to the Seat dealer and they cant find a part number for this...

does any one no the part number for the breather pipe i think its called which goes from air box to engine with clips on end. many thanks

:shrug: i am trying to find a filter that will fit on the breather pipe for the secondary air pump, has anyone got a link to a website i can buy it straight of! and how would it fit without cutting it to the filter as it has it has a connection for the air box and i dont want to remove the...

Sorry, but I've purchased something that I really really shouldn't have. Basically, my mate mentioned that I needed a breather filter on this pipe So I went and got one. And it now looks like this: Anyone guess the brand and why I feel dirty :( :D lol

Hey guys, hopefully this is a quick one. I did a search, but nobody actually answered the question in previous ppl's threads... I have a 1.4MPI and have bought a basic induction kit for it, but i need a breather filter for the oil feed. Im not sure what size i need to order?? 12, 15, 18mm...

hi i was wondering if someone can help. my breather filter that i got with my induction kit keeps getting blocked. i heard that to clean it, i should clean it in petrol. i was wondering if this is true?

Hi, ive got a 1.6 16v Leon S And i got a induction kit 2day, was for a a3, but im sure the engines should be the same?? or i thought wrong basically, got the airbox off, dont know where to put the air filter for starters?? as the bonnet mite not close then ive been told i need somewhere...

hey peeps first post here! my lady has an x reg 1.8 turbo shes on her hols in menorca at the mo so im gonna stick a filter on the old beast only question i have is .... the filter housing has a breather pipe around inch diameter going into the front of the housing if i fit a filter...

hey peeps first post here! my lady has an x reg 1.8 turbo shes on her hols in menorca at the mo so im gonna stick a filter on the old beast only question i have is .... the filter housing has a breather pipe around inch diameter going into the front of the housing if i fit a filter...

Hey guys, Replacing the air inlet pipe today (the 3" one) with a stainless steel one - Two pipes connect to the air inlet system, one from the idle vlave - that goes into the pipercross induction kit, the second pipe is smaller, made from hard plastic and goes into the bend of the 3"...

hey all.. you may have remembered not long ago (or not) that i poseted up about a problem with my car.. i was getting a strong smell of fumes in the cockpit area when i was idling or had on the aircon. well tonight i fitted my boost gauge.. took off the engine cover and found this...

mine has a hole in and inside is nasty nasty nasty with oil and crustyness!!! part number 06A103221AH split is right on the corner of the hose that comes out of the top of the engine, Can i drive it even though ive wrapped around a shed load of PTFE tape and then insulation tape around...

Just read through previous thread about not getting the right mpg. I put 20 quid in the car yesterday and it showed just over 3/4 of a tank full. Only driven about 30 mile since yesterday and now i showing just over half a tank. Wondered if it was the guage but dont seem to be and wondered if it...

Firstly, from the throttle body what is the best length for the intake tube before a cone filter - does it make a difference, can i achieve a pulsing or ram effect? Secondly, i am replacing the rubber 'gay' hose with a stainless 'sexy' steel one, do i have to incorporate the oil breather...

Hope this works ok.

Can anyone help me with the relocation of this breather pipe from my old air box . Pics would be good. Thanks

I have fitted my induction kit now on my beefa but im concerned about my pipercross breather filter. As you know there is a small black duct pipe that goes into the original airbox. I unclipped this and on the end was a weird circular squeezey clip. Do i cut this end bit off? at the moment i cut...