size

Hi there Am I correct in thinking that the cupra is 4x100 and has 56mm centre bore? If not what is the centre bore please? Thank you :) Emlyn

im planning on doing a gearbox oil change, and want to know what size hexaganol socket i need to get to fit the fill and drain plugs.

could someone tell me what size LCR standard injectors are in cc? and what ones should i upgrade to?

Couldn't find a thread so apologies if this has already been answered elsewhere. can anyone tell me what size bulbs are on the front fogs on a 02 1.2 SX ibiza? i think they are H3's but i'm not sure and if i can get an answer on here it would be much appreciated. thanks

Hi Guy's, Looking to replace pipe numbered 41 in the below link. Its the one from the intercooler pipe to the dump valve I think!? Just need to know what size the pipe is and if anyone else has changed it. http://www.vagcat.com/epc/cat/se/LE/2004/268/49/4753599/#41

ive already asked this question and cupra ross kindly replied but i got 2 answers from him ha, just wondering if someone could clear it up. im looking at getting a new back box for my cupra t 1.8 20v. just wondering what size the exhaust is after iv cut the original back box off, so i dont have...

What size hoe clips do i need for the Ruber pipe that goes from the turbo to the charge pipe. One end is bigger than the other. Just, have possibly blown a pipe off tonight, or split one, but i won't know until i can get a good look after work tomorow as it was dark when i did it, and the engine...

Can anyone tell me what thread/size the nuts are for the shocks on the rear? My mate managed to shear the thread trying to get it on, got some 10mm's but they dont fit (too tight/wrong thread)

Hi All, Does any one know what size the 3 bolts are that fix the engine undertray to front bumper? My car has been to a couple of garages recently for some engine/exhaust work and I noticed last weekend that the 3 bolts at the front of the undertray are missing! I contacted the garages...

Big enough for a pram/buggy?? Got a wean on the way, just checking before I buy one(a leon that is NOT a baby!)

Hey folks, had a search, plenty of m10x1 threads regarding oil temp or pressure sensors to put in the block bolt above oil filter or use the sump nut etc. However, I am looking at a sandwich plate which screws onto where the oil filter goes, then the oil filter screws onto that. Advantage...

Guys anyone know the size of the speakers on the front dash? (not the doors) thinking about replacing these.... I have a mk1 (1998) arose btw [B)]

guys, im looking at some 15mm hubcentric spaces, i know of the forum sponsors selling them but, what other cars will they be listed for as i cant find any on ebay for a leon, only skoda, vw, audi, so will other models fit my leon??

I am a bit confused with the wheel sizes on my 2004 mk1 leon tdi se. I am trying to buy some replacement wheels the same size as the existing ones so I can use the tyres I have which are good, as one of my wheels got mullered. I dont think it is worth £50 a corner for a proper refurb, so...

im going to be servicing my car at the weekend for the first time and i was wondering what size the sump plug is as ill probably replace it and the washer, is it m14??? also i was wondering what is best way to drain oil as ill only have a trolley jack i was thinking that i wont get all the oil...

has/does anyone ever had 205/50/16's on their ibiza? if so was there a big difference (if any) ? (tried searching but didn't find the answers i was looking for) cheers.

Evening all. i have a 2004 lcr, next week im ordering my blueflame exhaust so im not limited to rear arbs. i have got my 23mm front r32 arb from the dealer. mate works there so got it all for 60 quid. now which rear arb should i go for to best suit the front. i want it to stick to the road ...

I've searched on here and googled it! i need new pads and disks for the rear of my 01 cupra. but i've seen different sizes all over the place i know the leon cupraR is 256MM but is that the same for the normal cupra? Thanks

I have searched for this but can't find it anywhere.... How big is the air intake on the 2.0 16v? (if I remove the airbox) I'm looking at a jetex filter but not sure on the size

I am changing my brakes on the new LCR, just need to know what size torx key i need for the single bolt holding the disc on? can anyone help? Cheers craig