tool

A few weeks ago, I opened up www.mqbtools.nl, which I will use to release tools I've made for our beloved MQB-based cars! The first and most useful one is the FPA editor (FPA = Fahr Profil Auswahl, which is Driving Profile Selection). You can use it to edit gateway datasets for your 3Q0 gateway...

Hey today my and couple of friends tried lowering the car (both have done it on different cars) got so far on RDS but we couldnt get the part off without the hub spreader tool ive heard from many people use a screwdriver or similar but we tried that extensively and as the car is 8 years...

Hi Guys, I need to change my rear brake pads on my ibiza 2001 TDI. Can anyone advise me whether the rewind tool has a left or right handed thread to rewind the piston? Thanks

I have a jack, towing eye, locking wheel nut key and a small metal doofer that i have no idea what it is. Is thi the wheel nut cover remover? And if so, how does it work? Should I have a screwdriver too?

Ive just got a set of TT calipers and carriers and they realy need a good derust before i paint them.Any idears what tool is best other than a strait edge screw driver and a wire brush.I did thing about getting them shot blasted but im worried about the piston hole .

Im going to be changing my suspension springs when they arrive.. I was reading the guide to changing them and it says that you need a "Special Tool" to get your old springs off the shocks.. Could someone tell me what this "Special Tool" is and where i buy 1 from? Also is this the same for the...

Hello what sort of tool do i need to remove front seats in my seat ibiza mk4 2003 3 door one as i just bought a new set and i dont really fancy going to the garage and pay them for such as easy job? what tool and what size? regards simon

This may be a thicko question but what device is needed to make these logs that i keep seeing on boost problem posts,my lcr hesitates and is only 228.9 bhp and 238ftlb of torque with custom code stage 1 and if not to dear i would like to make some myself to see if anyone can shed some light on...

Where can i get a tool for removing the maf sensor from the mousing?I have a set of security bits but they are all six sided and the maf screws are five sided.I dont want to damage the screws so i want the proper tool rather than a bodge

is there a tool for removing the centres on cupra wheels? dont wanan keep using a screwdriver once wheels are refurbed.

Hi i got new pads and discs for the back of my ibiza cupra mk3 and tried fitting thim, i got the callipers off no porobs but wasnt able to slide the piston back to make space for the thicker pads and disc as there new. Do u need a special tool to do this?? If so where can i get one and what does...

Hello everyone.My car is an Altea TDI Sport 140 (manual 6 speed). I have just looked at removing the gearbox plugs for an oil change but it seems a special tool is required...can anyone help me as to what it is,please?

Has anyone who has got bluefin been able to use it as a diagnostic tool?

Hi. I'm wanting to change the oil on my 1999 Toledo V5 150. I need the oil filter cup wrench but don't know which one i need. Can anyone tell me what size to get please? Also, does anyone know the sump plug key size and shape please? Thanks. Rik.

Hi all, Wantin to try and upgrade my rear ,front wishbone bush as seen on briskoda. Just got a quote of 55-70 quid to make the four 8mm thick discs;at that rate i could try a local independant garage. has anyone got any cheaper more accessible ideas to make these discs or similar.Im all up...

after fighting with my rear brakes i bought the special tool. problem is now, the bloody tool is jammed on. anybody any idea how to get it off. it wont wind back

Is the drain plug tool an M16 tamper proof spline socket? found one one ebay just want to see if its the correct one. Its basically a 16mm spline socket with a hole drilled in the top of it. Is this right???

Is VAG COM interface any more that a diagnostic tool or can you also change millage, install new keys, read the content of ECU eeprom... Can you acces older and newer cars (CAN) with only one adapter or you need two? I was checking the web page of UCABLES and they also provide vag tacho...

Right last time I had to result in punching a hole in this with a screw driver and spinning it off that way as it was a proper PITA. So whats the best tool/size to get this off easier? Cheers

Hello, Did anyone try this with an ibiza mk4? awesome-gti.co.uk/product.php?xProd=10707&xSec=340 Looks pretty cool to me, but it would be nice to hear from anyone who actually tried it before I buy.. Br Rasmus