vag

Urgent help needed please! Car won't currently start after i took my clocks out, its now throwing up an immobiliser light. Anyone in norwich area who can have a look for me? I live in Coltishall, Norwich TIA

I read somewhere that you can use Vag Com to make your alarm chirp when it is engaged and disengaged. What's the chirp like? Anyone got a sound clip? Wouldn't mind getting this done on mine, but don't want it to sound ghey Cheers :D

Hi all just downloaded the share ware version of vag com so can only log to block 023 but thought i would ave a go any way and log 003,004 to see what maf reading and intake temps were like all comments welcome also would any other logs to 023 help Group A: '003 RPM Mass Flow Load...

Could anyone tell me the vag com setting that I need to change for my leon and what it should be changed to. I can't get it to find the engine when scanning, I had the same problem a while a go and had to change the baut I think but can't remember what to! I can't find the thread about it so...

I know i have asked about this before but im stupid,what is the ruff price i should pay for disc and lead and what version do i need for 2000 ibiza cupra,and do i need to watch out for demo discs,Thanks

Hi. I really need to get on VAGCOM with my car because of an intermittent problem regarding my other post in this section. Basically it only boosts to 6-7psi and the engine light came on. Then I had full boost again and the light went out. Now the light is out but boost is back down to...

Some of you might know that i had to sell my beloved LCR because of new job. Its was a sad day, but thursday i picked up my new car which eased the pain alittle. Its a 2006 Audi A4 2.0TDI S-line, took it away to a wedding at the weekend and was amazed at just how comfortable the ride was and...

were do i get vag com from and also the leads .Thanks

Everytime I try to do anything with Vag Com I get the message, 'VAG COM Has Stopped Working' and the program closes. I'm using release 409-1 with Vista and yes, I'm using a pikey eBay cable but it connects ok when I do the Com port test. I'm new to this and could do with a bit of advice.

could someone please clarify for me what vagcom and cable do i need to use for a VISTA usb laptop and a mk1 leon cupra 20vT 2004. cant seem to find a straight answer anywhere?

Seen it mentioned loads, but never really understood what it is? Has a search on here and theres lots of info as to problems etc but nothing that says exactly what it is? From what i can make out, is it some computer software and a lead to plug into your OBD? What can these things do - im not...

hi all. i want to get a vag com. i need sum 1 to point me in the right direction. i want a cheap 1 to start with. in the future i will get a desent 1. so any recommendations would be great. thanks all

am in desperate need of someone to look at my esp light on my leon cupra r if possible as my code reader does not work with my car.

here is the VAGCOM report from my car and its showing some faults. can any one expand for me? VAG-COM Version: Release 311.2-N Chassis Type: 6L - Seat Ibiza Scan: 01,02,03,08,09,15,17,19,37,44,46,56,69 Address 01 -------------------------------------------------------...

Has anyone got the vag com software who lives in the south east ( bromley/orpington) who will be able to help me diagnose a problem?? i will sort you out for your time and effort thanks

I have brought VAG come, i've installed the sofware on my laptop and have a USB to serial cable but where on my Seat ibiza S 2004 1.4 do I connect the serial cable to? Thanks

Leon 1.6 16v. Coming up with vag errors: Address 01 ------------------------------------------------------- Controller: 036 906 034 DS Component: MARELLI 4MV 4568 Coding: 00031 Shop #: WSC 06402 VSSZZZ1MZ4R004813 SEZ7Z0C2089799 1 Fault Found: 17961 -...

Need some help please!!!!! Had the EML come on today and then go off again but i have plugged vagcom in and it has give me this fault code: 17564 Any idea's? Thanks Alex

hi,just wondering if anyone near chesterfield has the equipment to do some logging on my lcr 2003.There is a problem somewhere as the car is holding back and is only making 228 bhp and 238 ftlb with custom code stage 1 and ive been told to post some logs,but as i dont have a clue what to do or...

everything in my car beeps.........and seriously bloody loudly!! washer fluid low, beep, petrol low.......beep, any other dash light......... beep! :doh:BEEP BEEP BEEP!! :censored::censored: is there any way to turn the damn thing off? please help:headhurt: