• Hey Guest👍👎 We're looking for reviews of your local CUPRA or SEAT Dealership - it's quick and easy to do: Leave a review now

danielc16

cupra R dan
May 13, 2008
327
0
guildford
right i got my mum to buy be vag com :) so now i know all the codes!

this is my fault codes:

Tuesday, 20 January 2009, 11:38:41

VAG-COM Version: Release 409.1-US



Control Module Part Number: 6K0 906 032 AB

Component and/or Version: 1.8L20VTCUPRA R 0001

Software Coding: 11500

Work Shop Code: WSC 00000

7 Faults Found:

17953 - Throttle Valve Controller: Malfunction

P1545 - 35-10 - - - Intermittent

17967 - Throttle Valve Control part (J338): Fault in basic settings

P1559 - 35-10 - - - Intermittent

17953 - Throttle Valve Controller: Malfunction

P1545 - 35-10 - - - Intermittent

17950 - Angle Sensor 1 for Throttle Actuator (G187): Implausible Signal

P1542 - 35-10 - - - Intermittent

17950 - Angle Sensor 1 for Throttle Actuator (G187): Implausible Signal

P1542 - 35-10 - - - Intermittent

17579 - Angle Sensor 2 for Throttle Actuator (G188) Implausible Signal

P1171 - 35-10 - - - Intermittent

17967 - Throttle Valve Control part (J338): Fault in basic settings

P1559 - 35-10 - - - Intermittent

does any one know is it a new tb or wiring?:cry:
 
Have you tried clearing them and seeing if they come back?

It may be from sometime ago, and they were never cleared. If the problem is still there, then they will re-occur.
 
Good luck,

I have the exact same codes.

I`ve bought a known working 2nd hand TB and also used another from a members car but to no avil, also tryed his ECU while he was here.

Had a garage looked at it and he just tryed to fob me off with a load of shite because i dont think he had a clue.

Seat wouldnt touch it nor a local VAG specialist because of the mods i`ve carried out, so i`ve had to hire a low loader to drag it down to Bill`s with hope he can sort it out.
 
Good luck,

I have the exact same codes.

I`ve bought a known working 2nd hand TB and also used another from a members car but to no avil, also tryed his ECU while he was here.

Had a garage looked at it and he just tryed to fob me off with a load of shite because i dont think he had a clue.

Seat wouldnt touch it nor a local VAG specialist because of the mods i`ve carried out, so i`ve had to hire a low loader to drag it down to Bill`s with hope he can sort it out.

I hope I can too..
fingers crossed
:blink: