hey does anybody have one of these fitted and is it possible to post a picture so i can see if mine is correctly fitted or if i made a mess 
-
Hey Guest👍👎 We're looking for reviews of your local CUPRA or SEAT Dealership - it's quick and easy to do: Leave a review now
is it possible to make a mess of the instalation?
You pretty much restricted where / how it can be installed.
Although ive read that you should try to have the maf sensor at the same angle as stock... so as long as it looks as per richybigman's pics you will be ok.
You pretty much restricted where / how it can be installed.
Although ive read that you should try to have the maf sensor at the same angle as stock... so as long as it looks as per richybigman's pics you will be ok.
mine completely standard. how did you get the air intake piping to fit round did you have to cut it? is there any benefits to having the forge hoses to connect
I didn't have to cut it and when i fitted the BMC originally the engine bay was completely standard. Took me about 10 minutes to fit it the first time.
There is a benifit to haveing silicon hoses, they don't collapse, they have smoother flow of air and look schweet!
Mine looks bigger than the one in the pics above... it was bit of a pig to fit and had wondered how or why a lot of other people said it was a simple 5 minute job. It wasn't until I searched on the forums, I found that there are 2 sizes / part numbers that people have fitted to their LCR's... one is the "correct" size, the other is too big and doesn't fit. I didn't need to cut or modify anything. I found it easier to remove the battery to fit the cold air feed pipe, and I fitted the cold air feed pipe first, then I fitted the MAF to the other end, and then fitted the MAF into the silicone hose.
I didn't need to cut or modify anything. I found it easier to remove the battery to fit the cold air feed pipe, and I fitted the cold air feed pipe first, then I fitted the MAF to the other end, and then fitted the MAF into the silicone hose.
If you order the BMC for the LCR then it's too big. The one we need is the Audi S3 one if i remember correctly.
The red hoses are usually made to order so if you need these might be better to think about ordering these well in advance
Similar threads
