Well iv got them on but the bonnet wont shut!!! If you look at the pics you will see the lifters is overlapping the blue mental bit were the wing bolts on,(going diagonal) and it is catching on it and wont let me shut the bonnet..
Nah still no go Dont really know what to suggest now, only that volksbits mite of sent me the wrong ones?
The only other thing is to cut abit off the bit that the bottom of the lifter joins on too, then it would fit, but i dopnt really fancy doin that lol..
Yeh i removed that.. Would it be possible if you could get a pic like the second one i posted but from the side so i can see how close your lifters are to touching the wing bit..? Cheers
when the bonnet goes down and the lifter moves owns it sits on the wing bit? before the bonnet is even closed, surly it should do that there should be loads of clearence shouldnt there??
mine are vertually straight, and never had to remove any foam.
only thing it looks like is that the bonnet mounting points are on the inside and not on the outside of the hinge like they should be( maybe its just the photo), or that volks have sent the wrong ones
will have a look at mine tomorrow and get some photos if i can.
if you have them off the car, give some measurements, diameters+length and i'll compare to mine..can see if there the wrong ones!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.