Right peeps, did a log today.... 115, now how do i get the logs up from the notepad page from vagcom...? cheers
-
Hey Guest👍👎 We're looking for reviews of your local CUPRA or SEAT Dealership - it's quick and easy to do: Leave a review now
Boost Issues.....finally sorted...strange symtom though
- Thread starter M87NER
- Start date
Make sure they are saved as a .csv file and open them in microsoft excel then copy and paste them here between
Code:
tags.
Code:
Thursday 19 March 2009 22:19:45
6K0 906 032 AA 1.8L 20VT EU3 0002
Group A: 115
RPM Load Absolute Pres. Absolute Pres.
TIME
Marker STAMP /min % mbar mbar
0.38 840 18.8 990 1000
0.69 840 18.8 990 1000
0.98 840 18.8 990 1000
1.29 840 18 990 1000
1.59 840 17.3 990 1000
1.98 840 19.5 990 1000
2.29 1360 54.1 990 1000
2.59 1360 38.3 990 1010
2.89 1280 54.9 990 1000
3.19 1600 53.4 990 1020
3.49 1400 51.1 990 1030
3.79 1200 53.4 990 1030
4.09 1560 48.1 990 1040
4.39 1360 19.5 990 1040
4.79 1120 57.1 990 1020
5.09 1480 49.6 990 1030
5.39 1160 51.1 990 1030
5.68 920 70.7 1080 1040
5.99 1120 62.4 990 1050
6.29 1160 63.9 990 1040
6.59 1320 59.4 990 1060
6.89 1520 53.4 990 1060
7.19 1640 58.6 990 1060
7.49 1720 57.9 990 1070
7.79 1880 62.4 990 1070
8.09 2080 66.2 990 1090
8.39 2280 74.4 990 1120
8.69 2280 46.6 990 1190
8.99 2000 15.8 990 1140
9.29 1480 22.6 990 1080
9.68 1560 47.4 990 1060
9.99 1560 67.7 1030 1060
10.28 1680 72.2 990 1090
10.58 1800 61.7 990 1110
10.88 1600 28.6 990 1110
11.18 1320 14.3 990 1080
11.48 1280 47.4 990 1050
11.78 1280 63.2 990 1050
12.08 1320 70.7 990 1060
12.38 1360 68.4 990 1080
12.68 1400 65.4 990 1080
12.98 1400 57.1 990 1090
13.28 1200 24.1 990 1080
13.58 1160 27.8 990 1050
13.88 1120 57.1 1050 1030
14.18 1160 72.9 1130 1050
14.58 1200 75.9 1160 1070
14.88 1240 77.4 1180 1080
15.18 1280 78.9 1190 1090
15.48 1320 80.5 1190 1110
15.78 1360 81.2 1210 1120
16.08 1360 81.2 1220 1130
16.38 1400 82.7 1210 1140
16.68 1440 83.5 1210 1150
16.98 1480 83.5 1240 1170
17.28 1520 84.2 1240 1180
17.58 1520 87.2 1270 1190
17.88 1560 88 1290 1210
18.18 1600 88.7 1300 1220
18.48 1640 89.5 1300 1230
18.78 1680 90.2 1330 1250
19.08 1720 91.7 1340 1260
19.38 1760 91.7 1340 1280
19.68 1800 94.7 1380 1290
19.98 1840 98.5 1390 1310
20.38 1880 101.5 1410 1350
20.68 1960 104.5 1450 1380
20.98 2000 107.5 1470 1420
21.28 2040 113.5 1520 1460
21.58 2120 120.3 1560 1520
21.88 2160 127.8 1600 1590
22.18 2240 134.6 1640 1680
22.48 2280 140.6 1690 1780
22.78 2360 146.6 1750 1870
23.08 2440 153.4 1800 1970
23.38 2520 158.6 1860 2060
23.68 2600 160.9 1970 2150
23.98 2680 165.4 2050 2230
24.28 2760 166.9 2210 2290
24.58 2880 169.2 2550 2350
24.88 2960 175.2 2550 2410
25.28 3080 181.2 2550 2450
25.58 3160 188.7 2550 2490
25.88 3280 191 2550 2520
26.18 3360 191.7 2550 2530
26.48 3480 191.7 2550 2530
26.78 3520 191.7 2550 2530
27.08 3640 191.7 2550 2520
27.38 3760 191.7 2550 2520
27.68 3840 191.7 2550 2510
27.98 3960 191.7 2550 2510
28.28 4040 191.7 2550 2500
28.58 4120 191.7 2550 2490
28.89 4240 191.7 2550 2500
29.18 4320 191.7 2550 2500
29.48 4440 191.7 2550 2510
29.78 4480 191.7 2550 2510
30.18 4600 191.7 2550 2480
30.47 4680 191.7 2550 2450
30.78 4760 191.7 2550 2440
31.08 4880 191.7 2550 2420
31.37 4920 191.7 2550 2400
[code]need do some more when me battery doesnt decide to go flat, i thought the results would of gone in a table format... im doing something wrong arent i ...
Well after a long time with this fault i finally found out what was causing my boost to drop as soon as it was becoming under load........ it was my induction kit!
would never of thought this would cause the boost issue, but after seeing the state of my filter i could see that it would off been struggerling to breath efficiantly, as when i holded it up to the light i couldnt see any light getting through-only a little bit where it was still clean, the filter had rusted on all the mesh due to been it the wing... so now has been relocated to the engine bay with new filter.....
problem sorted.
would never of thought this would cause the boost issue, but after seeing the state of my filter i could see that it would off been struggerling to breath efficiantly, as when i holded it up to the light i couldnt see any light getting through-only a little bit where it was still clean, the filter had rusted on all the mesh due to been it the wing... so now has been relocated to the engine bay with new filter.....
problem sorted.
Roll on rolling road day see what she pushes out this time...
just to show the state of my filter here are a couple pics,
as you can see its all gone rusty....with a little clean bit
and here with a torch inserted in the fiter to show how much light gets through... yes hardly any...lol
just to show the state of my filter here are a couple pics,
as you can see its all gone rusty....with a little clean bit
and here with a torch inserted in the fiter to show how much light gets through... yes hardly any...lol
Similar threads
