Brake fluid on rear

[Prebs]

I have changed my old brake fluid (EBC 306 sport "NOT RECOMENDED") for new motul RBF660 as recomended by people on here. I used a pressure system where you connect a cap with a pressure hose to a spare tire and then you pressuraise the brake resavoar. Works great!

I could not detect any color difference between the old and new fluid so I hope I´ve bled the system enough. I manage to bleed 0.33Litre on the rear and about 0.23L on the front. Is this enough??? All in all I used about 2 and 1/3 of a bottle with motul. Pedal feel firm and as far as I feel there´s no air in the system. I´m just wondering if I got all of the old "EBC-****" out of the system.

Anyone would share their experience?

Prebs

 

[ibizacupra]

sounds like you got enough out of the back,
0.33+0.23 is only just over 1 bottles worth tho? you say you used 2.33 bottles worth?

 

[Prebs]

sounds like you got enough out of the back,
0.33+0.23 is only just over 1 bottles worth tho? you say you used 2.33 bottles worth?

I meant 0.33L on each rear and 0.22L on each front + full brake reservoar tank. 2 and 1/3 bottles

Did this after I had put in new rear beam VT mounts bought from you. Have got plent of pics I´ll post up from the install.


Prebs

 

[ibizacupra]

should be motul in there now then