-
Guest, 🎅🎄Looking for a stocking filler idea? Why not treat yourself or a loved one to our high quality CUPRA or SEAT valve caps. Order now from the merchandise store
Weird - and not for the first time - unable to connect to the engine module on 1.6 DOHC Mk1 Leon. Can connect to all the other modules.
Has anyone done this successfully?
You should be able to connect. What interface and what version software? Have you tried messing with the baud rate settings on the Options screen? Some ECUs are very fussy and if you are not using genuine Ross-Tech hardware, you may need to play with the baud rate to get things to talk.
Licenced 409 with a 3rd party USN cable, Bruce. I did try setting the Com port to different baud rates... I'll persevere! 
Only other thought then is that something is messing with the K-Line going to the ECU.
Have you tested your setup on another car? Got any buddies that might let you give it a try? If it works on another car, then the problem would be in your car. If it does not work on that car, then I would suspect the interface cable.
Have you tested your setup on another car? Got any buddies that might let you give it a try? If it works on another car, then the problem would be in your car. If it does not work on that car, then I would suspect the interface cable.
Used my cable on loads of cars without problems, Bruce. It gets very regular use on my own 2.
I have tried before on this particular car and not been able to get the engine module.
I have tried before on this particular car and not been able to get the engine module.
Similar threads
