The interior looks well nice buddy
fancy doing mine..
what fabric you wanting it doing in , sure can sort something out
, as long as you dont have a nomad pod they are a ******* to do hece mine is not covered paited them black
-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
chris_200120vt mk3 ovni cupra autostrada loving
- Thread starter chris_200120vt
- Start date
what fabric you wanting it doing in , sure can sort something out
, as long as you dont have a nomad pod they are a ******* to do hece mine is not covered paited them black
the reaction im wanting for next years show hence was keeping it quiet
4 shows entered since the paint job and no throphys
Oh mate, they're absolutely lovely
Look forward to the pics...
no they are only 7.5" wide so should be problem free did look at 9" but there is arch work needed so skipped on those
what fabric you wanting it doing in , sure can sort something out
same color as yours buddy,
as for the piller gauge yeah got a nomad
same color as yours buddy,
as for the piller gauge yeah got a nomad
the nomad may be best been flocked im not happy with mine and had to do it in 3 sections so may send mine to be flocked the other panels are ok to do
my fabric was £34 for 3 meters which is enough for all the pillars then will need the same again for the headlining but it is the best suede i have come across almost the same as alcantara
where it came from
http://www.ebay.co.uk/itm/F124-Blac...Textiles_SM&hash=item19c377cf8c#ht_4715wt_905
well a mate has just quickly chopped this for me going to do a improved version tomorrow
here it is
thoughts ??
here it is
thoughts ??
Last edited:
that is just a photoshopped version
bonnet comes next week
on the car it is coming off
if your intrested in having the re trim will do it
still not finished still loads to do yet , was looking inside the interior was just doing the handles when the seatbelt covers popped out begging to been done , now with the tt seats coming may do the backs of them
this is the real stuff claire ,started doing this a while ago but stopped but started doing it again as a little side line
it is very completly hard basic's terms
black resin base coat
apply carbon cloth when the base coat has gone to a tack
apply clear resin
flatten resin once dry
apply resin 5 times more
then once set start with a 120 grit work up to a 1200 grit then either laquer or polish with compound
each part takes round 48 hours to do
so it is time consuming to do hence why carbon parts are dear to buy
black resin base coat
apply carbon cloth when the base coat has gone to a tack
apply clear resin
flatten resin once dry
apply resin 5 times more
then once set start with a 120 grit work up to a 1200 grit then either laquer or polish with compound
each part takes round 48 hours to do
so it is time consuming to do hence why carbon parts are dear to buy
i am , doing mine first to get use't to the carbon again then i will already have orders for stuff doing plus a headlining re-trim
Similar threads
