Cupra Miltek

[Ad Lav]

Definately!

But my one was for the Cupra TDI

 

[Ric 2001]

Just look on their website but guessing they based the length on the FR's rear valance than the cupras

 

[Ad Lav]

The old FR's valance/bumper swooped in at the bottom whereas the new FR/Cupra's are more level!

 

[rashcupra]

mine sits level thgen when heated up it expands an inch or two and comes out a little bit ive seen milltecks fitted to cars and its litrally 15cms ish under the bumper

slamm the car down aswell and you will see even more problems but when all is well you are sorted!

 

[Ric 2001]

Yeah get the milltek rattling against the torsion beam when something is on the passenger side of the car.

 

[rashcupra]

yep you need to cut the brake pipe braket off if you take the n/s/r wheel off you will see exactly what i mean mate! will need to be welded in a diffrent location too

 

[Ric 2001]

Yep done that. Still rattles. But I need to get it straight now. It's a bit to the right of the cut out.

 

[Bubsy]

Right come on guys! you are meant to be entusiasts!

I gotta wait till the 17th. Who has the mp3 of a Cupra with a Miltek?

 

[Jam_Cupra]

with this issue with the tailpipe sticking out of the bumper, couldn't you weld a bit of pipe somwhere to make it longer?

im interested in one of these so any ideas how much it would cost for say a custom exhaust place to botch it to fit the cupra, any ideas?

 

[Ric 2001]

What would then require changing the hangers on the back box, don't really fancy doing that.

Who has the mp3 of a Cupra with a Miltek?

Got this.....

http://s71.photobucket.com/albums/i158/ukric2001/?action=view&current=Mk4Vid.flv

 

[Bubsy]

Nice on4e, perfect, as is the sound of the exhaust, jst what was looking for

 

[rashcupra]

dont need any bodging just needs alot of playting about but if you get a garage to fit it IT will be there problem then

 

[Bubsy]

Had it fitted today. Took em over 2 hours to get it sitting right. No rattles at all, just a lovely burble when giving it some. More responsive too, turbo spins up a lot quicker.

 

[Jam_Cupra]

good stuff mate, any chance of getting a video clip? how much it cost you to get it fitted?

 

[RichieRich]

its a 55mm to 65mm exhaust adapter you will need! i just sold mine to!

 

[kriso]

Got any pics Bubsy?

 

[Bubsy]

I'll get some at the weekend and put em up.