Cupra to Cupra R injectors!

[Forbez]

please be gentle with me. Being new to the Seat and turbo world simultaneously,please bare / bear (???) with me.

What gains would be expected by changing the fuel injectors from standard cupra, to the cupra R ones?

Would it need the engine manangement to be altered to make any gains?

The car has the RSD 210 conversion.

Hope you can help, cheers

 

[andyj]

You've seen the Cupra R injectors on Ebay to then !!!!

 

[Saul]

im 99% sure they are the same (ibiza) as its only a software change.

but, putting bigger injectors in requires you to check the pump can deliver the required flow and also that your map is requesting the fuel.

 

[CupraR-Rog]

Aren't the Ibiza Cupra's and Cupra R's identical under the hood apart from an engine re-map?

If so, no gains what-so-ever!

If you're talking LCR injectors though, then you'll need the engine re-mapped as otherwise you'll over fuel...

 

[Forbez]

Cheers guys its the Ibiza cupra and Ibiza cupra R.

Yeah i noticed the injectors on ebay, but its something ive been thinking about for a while.

Can anyone confirm if the bezza cupra and cupra R injectors are the same?

 

[m0rk]

they're just stock ibiza 20vt / r ones - no different

part number is either
06A 906 031 AB
or
06A 906 031 BA

FYI - LCR ones are
06A 906 031 BC

 

[Sim]

Cupra and Cupra R engine code is both AYP, so i guess the two engines are 100% identical.

 

[Dormouse]

Cupra and Cupra R engine code is both AYP, so i guess the two engines are 100% identical.

Correctomundo mechnically.

Dor.

 

[Forbez]

Cool! Cheers guys!

 

[tstrahonja]

they're just stock ibiza 20vt / r ones - no different

part number is either
06A 906 031 AB
or
06A 906 031 BA

FYI - LCR ones are
06A 906 031 BC

06A 906 031 AB is very different than 06A 906 031 BA...BA is much shorter...
is it possible to use both of these on aqx engine?

 

[m0rk]

Don't know - that was 5+yrs ago

Probably pulled the information from ETKA

Mark

 

[tstrahonja]

Yeah, it was a loong time ago...hopefully someone will clarify this cuz it seems that ive bought injectors that wont fit....