Deep Dish help

[Domcj]

Hi,

I am looking at changing my wheels and i am going for something a little different but need some advise

Is there going to be much rear arch work needed to house 10x17" alloys on the rear.

The front will be fine there only 8.5 wide

Anyone gone this way before that can help

 

[stuart86]

not really worth going over 9.5j

anything bigger will need an arch pull and taking the liner out

also depends on the offet of the wheels aswell

 

[Icecavern]

I looked at fitting 9's on the back, even that was pushing it and was goign to foul the arches, so 10" is going to be a lot of work to fit.

 

[Domcj]

I need to get the offset sorted yet and then look at it from there. I think it would look awesome though

 

[kenny-cupra]

i wonder if a set of 9.5"x18" et28 alloys onto the back of a leon without any arch work as i got the chance of a set of porker rim for good price

 

[dj_hektik]

im also interested in this... bump

 

[nick_c_1986]

i've got 8.5 front and 9.5 by 18 rears, have very stretched tyres for those to clear the arches!

215/35/18 for the 8.5 and 225/35/18 for the 95 however i'm dropped to the floor! approx 150mm i guess.

et69 with 35mm adaptors so et34

fronts et69 with 45mm adaptors so et24

rear wheel

any questions p'm as i looked into custom adaptors, ofsets for ages and ages.