• Evo Magazine are looking for a mint and (and ideally unmodified) Leon Cupra Sub8 to drive and photograph for a feature. Find out more here .
  • Hey Guest👍👎 We're looking for reviews of your local CUPRA or SEAT Dealership - it's quick and easy to do: Leave a review now

lobs84

Active Member
Jul 20, 2010
126
0
Coventry
Hi everyone.
I have just purchased a diagnostic tool via eBay. While it comes with a book full of codes and what they mean I have a few that I have no idea what the mean or how to fix them.
1. Long term fuel trim system too lean
2. Evaporative emission control system
3. 17705. I don't have an explanation for this code.

Is there anyone who would know what these mean and/or how to fix them?
Thanks in advance.
Will.
 
For number 3:


17705/P1297/004759 - Pressure Drop between Turbo and Throttle Valve (check D.V.!)

Possible Symptoms
• Malfunction Indicator Light (MIL) ON
• Power Loss

Possible Causes
• Leaking Hoses and/or Pipes between Components
• Boost Pressure Control Valve (N249) faulty
• Diverter Valve faulty
• Throttle Body dirty

Possible Solutions
• Check Hoses and Pipes between Components
• Check / Replace Boost Pressure Control Valve (N249)
• Check / Replace Diverter Valve
• Check / Clean Throttle Body
• Perform Throttle Body Alignment

Special Notes
• Did anyone install an extra (wrong) dump valve?
• When found in the NAR 2.0T (BPY) check RVUTB: 01-09-03 or 2018919 for updated Crankcase Breather Valve
• If the breather valve is faulty, full engine vacuum is typically found when removing the oil cap at idle.



RossTech Wiki is your friend!
 
Just an update to the fault codes that have appeared. They have all changed and are now these
16486 P0102 Mass or Volume Air Flow Circuit - Low input
16825
17705

Could someone tell me what they mean and possible fixes please
Thanks
Will